Craig CBT3348A Owner's Manual page 5

8. If a USB Device is already inserted to
a Button approximately 2 seconds then release it to turn to USB playback
mode. Press and hold again to turn back to BT playback mode.
9. When finished listening, unplug the unit from your car cigar lighter socket to
shut off the unit.
Notes:
 When the external BT Device searched the unit, our model number "3348A"
will appear on the display of external BT Device.
 If while pairing you are asked for a code please try "0000" or "1234".
Normal operation after pairing:
1. Power on the external BT Device and enter to BT playback mode.
2. Power on your car radio and received the preset FM radio frequency as
previously instructed.
3. Connect the unit to your car cigar lighter socket as previous instructed. You
will hear an audible prompt say "Bluetooth ready for connection".
4. Wait a few seconds until the unit is automatically paired to the external BT
Device. When paired, the unit will sound a prompt "Bluetooth connected".
5. After pairing is complete you may now play music and answer calls with your
external BT Device and car radio.
USB:
For listening to music from your USB Device through the unit and your car
radio, follow the steps below:
1. Insert the external USB Device (not included) into the
unit as illustrated follows:
(Note: USB 1 Port is NOT support USB music playback.)
2. Power on your car radio to the preset FM radio frequency as previously
instructed.
3. Connect the unit to your car cigar lighter socket and enter it as previously
instructed. Wait a few seconds, audio will automatically start.
4. During playback:
 Press the
playback.
Button to pause; press again to resume to normal
4
USB 2 Port, press and hold the
USB 2 Port on the