1. Manuals
  2. Brands
  3. Hobby Manuals
  4. Caravans
  5. Caravan Series
  6. Handbook

Hobby Caravan Series Handbook

Hide thumbs
Table of Contents

Advertisement

Quick Links

Dear Camper Owners,
We would like to congratulate you on the purchase of your new HOBBY camper and hope that you will
always enjoy traveling with it.
Please read this manual carefully, even if you have been driving a camper for a longer period of time. It
will help you to avoid operating errors and damage to the vehicle and its equipment. Correct handling
of all technical details will increase your driving comfort and maintain the value of your camper.
We wish you and your companions many enjoyable trips and hope you always have a safe journey.
Your
HOBBY Camper Plant
Ing. Harald Striewski GmbH

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Caravan Series and is the answer not in the manual?

Questions and answers

John Milner
April 25, 2025

Hi I am looking for the awning size of my Hobby Prestige720UMF 2005 model. Can you help? Thanks

0

Related Manuals for Hobby Caravan Series

Summary of Contents for Hobby Caravan Series

  • Page 1 Dear Camper Owners, We would like to congratulate you on the purchase of your new HOBBY camper and hope that you will always enjoy traveling with it. Please read this manual carefully, even if you have been driving a camper for a longer period of time. It will help you to avoid operating errors and damage to the vehicle and its equipment.

  • Page 2: Table Of Contents

    Table of Contents Introduction ......................01-1 1.1 General information ...................01-1 1.2 Markings in these operation instructions ............01-2 Safety ........................02-1 2.1 General information ...................02-1 2.2 Before the drive ....................02-2 2.3 Loading ......................02-4 2.4 Handling Performance ..................02-6 2.5 After the drive ....................02-8 Undercarriage and vehicle registration ..............03-1 3.1 General information ...................03-1 3.2 Safety coupling WS 3000 ..................03-3 3.3 Locking brake facilities ..................03-7...
  • Page 3 Installation of electrical devices ................07-1 7.1 Safety tips ......................07-1 7.2 Service panel .....................07-2 7.3 Electrical supply ....................07-4 7.4 Function of the electrical supply unit ..............07-6 7.5 Changing the taillight bulbs ................07-7 7.6 Circuit diagram (exterior) ...................07-8 7.7 Lighting in the camper ..................07-10 7.8 Electric floor heating ..................07-12 Water.........................08-1 8.1 Water supply ......................08-1...

  • Page 4: Introduction

    1.1 General information Your HOBBY camper has been built in accor- dance with the latest technology and recognised safety regulations. Despite all of these safety measures, it is possible that people may be hurt...

  • Page 5: Markings In These Operation Instructions

    1.2 Markings in these operation instructions Markings in these operation instructions The handbook explains the camper as follows: Texts and illustrations The texts which accompany illustrations are found directly to the right of the illustrations. De- tails in illustrations (here: entry door) are marked with position numbers (1).

  • Page 7: Safety

    2. Safety 2.1 General information Keys The following keys are provided with the camper: - Two keys which fit into the following locks: - entry door, - service flaps, - toilet flap. - gas-bottle container lid - fresh-water tank lid Warnings and information labels are attached both inside and outside the vehicle.

  • Page 8: Before The Drive

    Fighting a fire • Evacuate all passengers immediately. • Close the main shut-off valve on the gas bottle as well as the shut-off valves on gas- powered appliances. • Shut off the electrical supply • Sound alarm and call the fire department. • Only fight the fire yourself if this is possible without risk. 2.2 Before the drive As the owner and driver, you are responsible for the condition of your vehicle.
  • Page 9 ward as far as possible or fold over the satel- lite dish. • If necessary, secure the roof load and lash it to prevent slippage. • If necessary, secure all bicycles and lash them to prevent slippage, ensuring that they do not cover any lighting equipment.

  • Page 10: Loading

    2.3 Loading Rules for loading: • Spread the load evenly between the left and right-hand side of the camper. Heavy or bulky objects belong in the lower storage compart- ments and near the axle. • If your camper has a tandem axle: distribute the centre of weight between the two axles. • Never focus the load in the camper to the rear (danger of swinging back and forth).
  • Page 11 1. Determine the maximum drawbar load of your base vehicle by checking its documentation, the type plate or the drawbar plate. 2. Your HOBBY camper has a maximum per- missible drawbar load of 100 kg. 3. Adjust the drawbar load on the camper to the lower of the two values by loading it careful- ly.

  • Page 12: Handling Performance

    2.4 Handling Performance Driving Take a test drive or a safety training course be- fore the first long drive to better acquaint your- self with the carriage in driving conditions. Rules for driving • Do not underestimate the length of the carriage. • Exercise special caution when driving toward yards and through gates. •...
  • Page 13 Driving in reverse Your HOBBY camper has a braking system with automatic reverse. This makes driving in reverse possible without activating the overrunning bra- ke. However, in addition to rolling resistance, the residual brake force must first be overcome.

  • Page 14: After The Drive

    When positioning the camper manu- ally, only use the steering handles at the front and rear ends of the cam- per. Never push on the plastic parts or the walls. 2.5 After the drive Choosing a parking place Rules for choosing a parking place: •...
  • Page 15 Water installation Water left standing in the fresh water tank or the pipes quickly becomes undrinkable. Therefore, check the water pipes and the fresh- water tank after each use to ensure they are clean. If necessary, use chemical or biological disinfectants and rinse well with sufficient fresh water.
  • Page 16 02-0...

  • Page 17: Undercarriage And Vehicle Registration

    For the sake of traffic safety, the vehicle under- carriage must be maintained just as conscienti- ously as the base vehicle itself. This maintenance should be carried out by your HOBBY dealer. If spare parts are required, use only the original parts designated by the manufacturer.
  • Page 18 The camper's turning rod spring axle unit is equipped with compact wheel bearings. The cylinder hub, compact bearings and axle nuts form a closed unit. The compact bearings are free of maintenance due to their special grease. The wheel brake may never be repositioned on the fixing lock or on the yoke end of the bars! Only reposition the wheel brake on...

  • Page 19: Safety Coupling Ws 3000

    3.2 Safety coupling The camper is equipped with an anti-rolling cou- pling in accordance with ISO 11555-1. This safety WS 3000 coupling stabilises the camper while driving and ensures better driving performance. Please note the additional operating instructions and the manufacturer's safety instructions. WARNING: The laws of physics cannot be defied with a safety hitch.
  • Page 20 Activation of the stabilization system • To activate the stabilization system, the operation lever must be moved downward out of the closed position (2) until it locks in (3). The spring corpus will become tense in the process, so that contact pressure is created on the coupling ball via the friction elements.
  • Page 21 Maintenance Coupling ball on base vehicle Ensure that the coupling ball meets the required dimensions and is undamaged, clean and free of grease. When using dacromet-coated (dull silver anti-corrosion coating) as well as lacquered coupling balls, the coating must be removed completely with sandpaper (200-240 grain) so that it does not create deposits on the friction lining.
  • Page 22 Noises Certain noises can occur during the course of the drive; these noises, however, have no influence on the operative effectiveness of the tension ball coupler. Possible causes of these noises can be: . a dacromet-coated coupling ball on the base vehicle, 2.

  • Page 23: Locking Brake Facilities

    3.3 Locking brake The components of the brake facilities, particu- larly the overrunning equipment, wheel brakes facilities and towbar were checked in accordance with the appropriate EU Guidelines and may only be used in a licensed combination. If you alter or modify any components of the brake facilities, the operation permission loses its validity.

  • Page 24: Drawbars/Longitudinal Beams

    sign of strong brake lining wear is described in the aforementioned check for the overrunning equipment: if the safety clutch can be pushed in more than approx. 5 mm. In this case, the wheel brakes must be regulated by an experienced shop or, if necessary, the brake shoes must be renewed.

  • Page 25: Vehicle Registration

    The crank for the rotating stanchions is located at the front in the gas-bottle container. It is atta- ched firmly to the bottom of the container. 3.7 Vehicle registration Every vehicle which uses public roads is subject to registration. This includes your new camper. You can register the camper at your local regis- tration office.
  • Page 26 Name plate Permit number Vehicle ID number (FIN) Permissible maximum weight Permissible axle load, st axle Permissible axle load, 2nd axle 03-0...

  • Page 27: Fit For A Speed Of 100 Km/H

    3.9 Fit for a Speed of 100 km/h 1. Your HOBBY camper is technically equipped for a maximum speed of 100 km/h. Under no circumstances may this speed be exceeded! 2. Note the permissible maximum speeds for trailer carriages in the country in which you are travelling! 3.

  • Page 28: Definition Of Mass

    5. Additional equipment Additional equipment includes all items not part of the standard equipment preinstalled in the HOBBY factory or by the dealer. This also includes installations by special request. The mass in running order refers to the vehicle as originally equipped by the dealer or factory.
  • Page 29 If you are not sure whether you have overloaded the vehicle, weigh your vehicle on a public vehicle scale. Overloading can lead to malfunction or even tire blowout! This presents the danger of the vehicle spinning out of control, which endangers you as well as other dri- vers and pedestrians.
  • Page 30 03-...

  • Page 31: Wheels, Tires

    4. Wheels, tires Only use those tires designated in the registra- tion documents. Other tire sizes may only be used with the permission of the manufacturer 4.1 Tires (ABE). • Check tires regularly to ensure that the tread is worn down evenly; check tread depth; check for external damages.

  • Page 32: Profile Depth And Age Of Tires

    If the tire pressure is too low, the tire can overheat. This can result in serious damage. The correct tire pressure is given in the table on wheels/tire pressure found under "Technical Information" or on the labels in the gas-bottle container and on the wheel cover.

  • Page 33: Rims

    4.4 Rims Only use rims that are covered by the vehicle licence. Should you wish to use other rims, please note the following: Rules for the use of other rims: - Size, - mechanisms, - compression depth and - the load/bearing capacity must be sufficient for the permissible total mass.

  • Page 34: Changing The Tire

    4.5 Changing the tire Preparing to change the tire • If possible, only change the tire when the base vehicle is coupled to the camper. • Park the trailer carriage on as firm and even a surface as possible. • If you have tire trouble on a public road, turn on your hazard warning signal lights and set up the warning triangle.
  • Page 35 Warnings for changing the tire: Only use the specifically designated jack for the corresponding frame parts. For example, on the axle pipe corre- sponding to the swinging lever group or on the stringer in the area of the axle fasteners. Damage or even an accident result- ing from the vehicle's toppling over can occur if the jack is applied to...
  • Page 36 • Lower the jack and remove it. • Tighten the wheel fatening screws evenly with the wheel wrench. The nominal value of the attachment torque is 0 nm for steel rims and 20 nm for aluminium rims. • Release the handbrake and reactivate the stabilization system.
  • Page 37 D Hold the bottle down with the filling tube and then press them together. Press the entire bottle contents into the tire. Pull the fill hose off () and screw the valve insert (2) tightly into the tire valve with the valve-core remover (3).
  • Page 38 04-8...

  • Page 39: Exterior Structure

    5. Exterior structure 5.1 Ventilation and De-aerating Rules for forced ventilation Proper ventilation and de-aerating of the vehicle is a prerequisite for ideal living comfort. A draft- free forced-ventilation system is located in the floor and a forced de-aerating system is located in the ceiling which should not be interfered with.
  • Page 40 Refrigerator The ventilation bars provide the refrigerator with fresh air from outside to ensure sufficient cooling performance. The ventilation bar is located at the bottom of the exterior vehicle wall. The de-aera- tion bar is located above the ventilation bar. there is a danger of suffocation if ventilation openings are blocked! Therefore, do not block ventilation...

  • Page 41: Vehicle Keys

    5.2 Vehicle keys External entry door To open: • Unlatch the lock with the key. • Pull the door handle. • Open the door. To close: • Shut the door. • Turn the key until the latch clicks audibly. • Turn the key back into the vertical position and pull it out.
  • Page 42 Model b: To open: • Reach into the grip plate (A), pull the release lever, open the door and let go of the lever. To close: • Pull the door shut. • Press the locking button (B). Entry door model b Stable entry door The upper (3) and lower (2) parts of the entry Entry door model b...

  • Page 43: Service Flap

    Never lock the upper part of the door when the insect screen is closed. The insect screen must always be open when you lock the door. Locking the upper part of the door Model a: • Push the bolt () outward. •...

  • Page 44: Gas-Bottle Container Flap

    All of the fastenings on the service flap must lock into place when closing to ensure that the flap will always be closed tight. If the flap is not closed correctly, it could become permanently deformed, especially when the camper stands unused for a longer period of time.

  • Page 45: Roof And Roof Rail

    5.6 Roof and roof rail Rules for loading the roof rail: • Fasten the carrier or the cross braces for the roof loads to the roof rail. • Only store light baggage on the roof. • Lash the roof load sufficiently and secure it against slippage or falling.

  • Page 46: Guide Rail For Outer Tent

    5.7 Guide rail for outer tent The guide rail for the outer tent, which is used to insert the weather strip, is beaded at the rear of the camper on a level with the taillights as well as at the lower edge of the front end of the camper.

  • Page 47: Interior Structure

    6 Interior structure 6.1 Opening and closing doors and flaps Stowage cupboards To open: • Pull the handle until the flap opens. To close: • Press the flap on the handle until you feel the flap shut. Furniture doors with handle Washroom door • Push the handle to open and shut the door. Furniture doors with knob Wardrobe • Turn the knob to open and shut the door. 06-...
  • Page 48 Furniture doors with sliding handle Kitchen cupboards (except Excelsior) To open: • Using your thumb and index finger, push the sliding handle (1) up. • Pull on the handle until the cupboard door swings open to the side. To close: • Using your thumb and index finger, push the sliding handle (1) up. • Using the handle, push the cupboard door closed. • To fasten the door, let the sliding handle (1) snap back in its original position. Push-lock drawers Kitchen drawer To open: • Press the push-lock (2) until the knob jumps up. • Pull on the handle (3) until the drawer slides out.

  • Page 49: Media Oval

    6.2 Media oval (rotating TV/bar) The media oval is a room divider, mounted on a pivot, which can be used as both a bar and a TV cupboard for flat screens. To swing the media oval, pull the catch (1) and, after swinging out the media oval, press and snap the catch back into place to secure the media oval. The switch () for turning the LED lighting for the bar on and off is located directly beneath the media oval next to the 230 V sockets for the kitchen. In most models, the lighting for the bar cannot be turned on and off using the control panel. The 230 V sockets as well as the antenna ter- minal (3) for the television and the receiver are located underneath the media oval in the top compartment of the kitchen L-element. The 12 V socket (4) shown in the photo is not included in standard delivery. (It can be ordered as an option.) The cables for the antenna terminals of both the media oval as well as...

  • Page 50: Seat Chests And Conversion Of Beds

    6.3 Seat chests and conversion of beds The seat groups can be converted into comfor- table beds. Elevating table model Conversion: • Remove the seat and back cushions. • Pull the latch of the table frame upward and release. • Pull the latch of the table frame towards the interior of the vehicle and lower the table. • Replace the seat cushions and pull themto the middle of the table. • Fill the empty spaces with the back cushions. To do this, turn the back cushions (2) around and lay them with the wider side against the front or standing wall. • The back cushion (3) should be placed ver tically into the gap to fill the remaining space in vehicles with a width of 2.5 m. Ensure that the tabletop, seat chests and/or covers as well as cushions are well secured so that nothing falls. 06-4...

  • Page 51: Children's Beds

    Bed expansion for vehicles with rear seat group Setting up the beds left backrest Rear cross- wise seat right seat left seat right backrest 6.4 Children's beds • Windows by the children's beds are secured against accidental opening, to effectively pre vent children from falling out. Be careful when using the upper bed for small children, as there is a danger that they may fall out. Never leave small children unattended in the caravan. 06-5...

  • Page 52: Windows

    6.5 Windows Hinged windows To open: The window can be adjusted to open at varying degrees: • Turn the latch into the vertical position. • Press the window outward until you hear a click. The window automatically remains in this position. Windows by the children's beds are secured against accidental opening, to effectively prevent children from falling out. To close: • Lift the window slightly outward so that the hinge disengages. • Close the window. • Turn the latches (1) and (2) into the vertical position. Black-out pleating and insect screens The shades and insect screens are integrated in the window frame. The black-out pleating can be adjusted to any desired position.

  • Page 53: Roof Bonnets

    To shut the insect screen: • Pull the insect screen (3) completely down with the strap (4) and let go. The screen re mains in this position. To open the insect screen: • Pull the insect screen (3) slightly down with the strap (4) and then guide it upward. The screen rolls upward automatically. Do not let the shade or the insect screen fly upward! To avoid consequential damage, leave the shades and pleatings open when the caravan is not in use. 6.6 Roof bonnets Safety instructions • N ever open the roof bonnets in a strong wind or when it is raining, hailing, etc., or if the outside tem- perature is below -20° C! • Never use force to open the roof bonnets if they are frozen or cove-...
  • Page 54 During this season and depending on the model and version, two different types of roof bon- nets will be installed. Please look at the photos opposite this text to decide which type has been installed in your camper and note the correspon- ding operating instructions. To open the roof bonnet: Before opening the roof bonnet, ensure that the- re is nothing above the bonnet, e.g. branches. The bonnet can be opened to an angle of 60°. Model a: • Push the crank ejector in the direction of the engraved arrow. This ejects the crank. Flip the crank to its user position. Turn the crank in a clockwise direction to open the bonnet to the Large roof bonnet model a desired position. In case of an obstacle, the overload protection of the crank will be activated. You will hear a clear “grating” sound in the crank. Model b: • Reach into the opening of the crank case and flip the crank to its user position. Turn the crank in a clockwise direction to open the bonnet to the desired position. Once you reach the maximum angle of the opening you will feel definite resistance. To close the roof bonnet: Large roof bonnet model b Model a: •...
  • Page 55 Shade The shade is infinitely variable; simply pull the handle to the desired position or until the lock snaps into the handle of the insect screen. Opening/closing the insect screen Push the handle strip of the insect screen against the handle strip of the pleating until the lock snaps into the handle strips. Round roof bonnet To open: • Pull the lower end of all three locking mecha- nisms (1) towards the middle of the window and release them. • Push the full surface of the roof bonnet up until it locks into place. To close: • Close the roof bonnet. • Press the locking mechanisms (1) firmly until they lock into place. 06-...
  • Page 56 06-0...

  • Page 57: Installation Of Electrical Devices

    7. Installation of electrical devices 7.1 Safety tips The installation of electrical devices in the HOB- BY camper have been carried out in accordance with the valid regulations and norms. Please note: • Do not remove safety tips and warnings on the electrical equipment.

  • Page 58: Service Panel

    7.2 Service panel Push-button Function 1 Heating system On/off switch - red LED shows function. 2 Floor heating On/off switch - red LED shows function. (not standard equipment) 3 Light in outer tent On/off switch for light in outer tent. 4 Wall lamps On/off switch for lamps.
  • Page 59 Secondary panel 1 Sleeping area Push-button Function Left On/off switch for mounted spotlight on left side of bed. Holding the push-button activates the dimmer function. Light increases and decreases. Centre On/off switch for ceiling lamp over suite. Holding the push-button activates the dimmer function. Light increases and decreases.

  • Page 60: Electrical Supply

    7.3 Electrical supply Electricity for the camper can be obtained from the following connections: - 230 V mains connection 50 Hz. () via the base vehicle if it is connected using the 3-pole plug (limited functions) - via a built-in auxiliary battery (not included). Everything that uses 2 V, such as lighting, water supply, etc., is available.
  • Page 61 Rules for the mains connection: • Use only a 3 x 2.5 mm cable with a maximum length of 25 m, a CEE plug and connector to connect the camper to an external 230 V mains. If the mains operates via a cable drum, this must be completely unwound, as otherwise induction may cause the cable to heat up and burn.

  • Page 62: Function Of The Electrical Supply Unit

    You can get more detailed infor- mation from your HOBBY dealer (see also 6.2). Operation via the base vehicle During the drive, the battery of the base vehi-...

  • Page 63: Changing The Taillight Bulbs

    7.5 Changing the taillight bulbs Carefully remove the protective caps with a screwdriver. Remove the four fastening screws with a crosstip screwdriver. Now you can remove the taillight from the frame. Remove the holder by loosening the screw. The bulbs are now freely accessible. Put the taillight back together by repeating the process in reverse.

  • Page 64: Circuit Diagram (Exterior)

    7.6 Circuit diagram (exterior) 07-...
  • Page 65 "Jäger" outlet (13-poled) View from connection side Contacts of sockets in accor- dance with DIN 1648-1:97 07-9...

  • Page 66: Lighting In The Camper

    7.7 Lighting in the camper can be switched via the control panel Surrounding LED spotlights () in the lounge area (Excelsior: Halogen spotlights) Corner shelf with integrated lamp can be swit- ched on/off separately. Indirect lighting above the stowage cupboards (3) and dimmable wall lights () 07-0...
  • Page 67 Indirect lighting (5) above the windows by the round seating arrangement Dimmable ceiling lights above the seating arran- gement (depending on the model) The control panel is used to switch the kitchen light on and off. The wardrobe lighting is activated via an inte- grated contact switch by opening the wardrobe doors (cannot be operated using the control pa- nel).

  • Page 68: Electric Floor Heating

    Turn the nose of the bear on the children’s bed- side light to switch it on and off. This lamp can be dimmed and set to operate as a night-light (“blue ears”) (cannot be operated using the control panel). The night-light can be switched on and off separately using the switch underneath the children’s bedside light.

  • Page 69: Water

    8. Water 8.1 Water supply The entire water system in your ca- ravan has been manufactured from food-safe materials. Despite this, we recommend that you do not use this water for drinking. General information • Water that is suitable for drinking should always be used with working with food.
  • Page 70 Rolling 22 l fresh water tank with service flap The fresh water tank can be rolled or carried. To add water: • Open the service flap. • Remove the screw connector and pull the immersion pump from the fresh water tank. •...

  • Page 71: Warm Water Supply Via Truma-Therme

    50 l fixed tank from 540 series onwards The tank has a volume of 50 liters. The tank is filled with fresh water by means of the filler neck (2) on the side wall. The fresh water filler neck is identified by a blue screw cap as well as a water faucet symbol on the lower edge of the frame.
  • Page 72 To remove water: • The water will be mixed to the desired temperature according to the position of the pre-mixing unit. Emptying the therme: • Switch off the electricity for the water pump by pressing the control panel (3) of the main switch for 5 seconds.

  • Page 73: Water Flushing Toilet

    8.3 Water flushing toilet Toilets with fixed seat and fresh water tank To prepare the toilet 1. Open the service flap on the exterior wall of your camper. 2. Swing the fill stanchions of the faeces tank in a 90° arch and remove the water tank exten- sion (located under the handle closest to the drain nozzle).
  • Page 74 5. Remove the extension and return it to its ori- ginal position on the faeces tank. Depending on the amount of space between the door and the faeces tank, you can also use a peg to fasten the extension to the door. Screw the cap back onto the wa- ter funnel and press it back inside towards the fresh water tank.
  • Page 75 0. Push the faeces tank through the door back to its original position. Do not use force the faeces tank back in; this could lead to severe damage. . Use the securing clamp to ensure that the faeces tank is locked into place and close the service flap.
  • Page 76 . Ensure that the valve is closed. Open the service flap on the outside of the camper. Pull the holder clamp up and remove the faeces tank. 15. Remove the water tank extension first to pre- vent its being lost when emptying the faeces tank.
  • Page 77 9. If necessary, prepare the toilet once again for use. Replace the water tank extension in its original position on the faeces tank. Push the faeces tank back into the toilet and close the service flap. Storage If you do not plan to use your Thetford toilet for a longer period of time, it is important that you follow these instructions first: Drain the water from your camper's central water...
  • Page 78 08-0...

  • Page 79: Gas

    9. Gas 9.1 General safety rules for the use of liquid gas facilities The gas operation pressure is 30 mbar. Inspection of the gas facilities • Hae the gas facilities checked by an expert before the first use. • The gas facilities should be inspected by an expert every two years.
  • Page 80 • Pressure regulators must have a fixed output pressure of 30 mbar. The requirements of EN 12864, Appendix D, apply accordingly. The regulator must have a rate of flow of 1.2 kg/h. • Connect the regulator knobs very carefully by hand.

  • Page 81: Gas Supply

    9.2 Gas supply The camper is equipped with propane gas facilities. These facilities opeate the following devices: cooker refrigerator heating element warm water boiler, if necessary special equipment, if necessary - baking oven, if necessary Bottle container The gas-bottle container holds two  kg bottles of propane gas (1).
  • Page 82 Changing gas bottles: Never smoke or light open fires when changing gas bottles. After changing bottles, check whether gas is escaping from the points of attachment by spra- ying these with a leak indicator. • Open the flap of the gas-bottle container. •...

  • Page 83: Hot-Air Heating

    9.3 Hot-air heating Heating element S 5002 and S 3002 Heating while driving is forbidden. S 5002 model 560 to 750 S 3002 model 400 to 540 (except 460 LU Excellent) Place of installation: in the closet or the corner of the flue Before first use: •...
  • Page 84 • If the flame extinguishes again, re-ignition takes place during the closing phase of the fusible cut-out of the ignition safety switch (approx. 30 seconds). • If no flame is ignited, the automatic ignitor (2) will continue to work until the operation handle (1) is switched to “0”.
  • Page 85 Circulation fan The heater in your camper is equipped with a circulation fan. It circulates the hot air throug- hout the interior of the camper. Use the knob to set the desired heating capacity. This knob (1) is located in the radiator cover (Fig. 1 and 2). Adjustment by hand: •...

  • Page 86: Hot-Air Heating With Integrated Boiler

    9.4 Hot-air heating with integrated boiler (only in 460 LU Excellent) Heating while driving is forbidden. The Combi 4 LPG heating is a hot-air heating system with an integrated hot-water boiler (con- tents: 10 l). It is possible to operate the heating system both with and without water.
  • Page 87 Frost control “FrostControl” is a safety or drain valve that does not operate on electricity. If there is danger of frost, it automatically empties the contents of the boiler using a draining stanchion. If there is excess pressure in the system, the pressure is automatically equalised intermittently by means of the safety valve.
  • Page 88 • Heating without controlled water tempera- ture: Turn the switch to operative setting (d). Turn the knob (a) to the desired setting for the thermostat (1-5). The green LED (b) for ope- ration will shine; at the same time, it shows the setting for the room temperature you have selected.
  • Page 89 Filling the boiler • Close the drain valve by pressing on the but- ton until it locks in place. • Turn on the 12 V power supply by means of the main switch on the control panel. • Open all of the faucets and set them to “hot”. Leave them open until the boiler has been filled by displacement of the air.
  • Page 90 Important information • Please read the separate operating instruc- tions carefully before initial operation of the heating system. • Always turn off the main switch for the heating system whenever the vehicle is not in use. • If there is danger of frost, always drain off the fresh water in the hot-water heater.

  • Page 91: Refrigerator

    Refrigerator Your camper is installed with a refrigerator made by Dometic or Thetford. If the external temperature is high, full refrige- rating capacity can only be ensured by means of sufficient ventilation. If necessary, to achieve better ventilation, the refrigerator’s ventilation grille can be removed at the campsite.
  • Page 92 Gas operation • Set the energy selection switch to gas opera- tion. • Open the main shutoff valve on the gas bottle and the gas shutoff spigot marked “refrigera- tor”. • Turn the thermostat up full and keep it pressed down. The refrigerator will either ignite automatically or by using the knob for manual ignition (depending on your model).

  • Page 93: Gas Cooker

    9.6 Gas cooker The kitchen segment of the camper is equipped with a 3-flame gas cooker. Before first use: • Open the bottle valve and the quick-close valve in the gas line. • The roof ventilation or the window must be open while operating the gas cooker.

  • Page 94: Oven

    Use potholders or mitts when hand- ling hot pots, pans and similar ob- jects. Danger of injury! Keep the cover (1) open after coo- king for as long as the burners are still giving off heat. Do not store easily inflammable objects such as dish towels, napkins, etc., near the cooker.
  • Page 95 Turning on the oven: • Switch on the 12 V power supply using the main switch on the control panel. • Open the main shutoff valve on the gas bottle and the gas shutoff spigot marked “oven”. • Open the oven door completely. •...
  • Page 96 09-...

  • Page 97: Accessories

    • Any accessories, add-ons, modifications or mounted parts that have not been approved by HOBBY may cause damage to the vehicle and impair its roadworthiness. Even if an expertise, general type approval or design approval has been provided for these parts, this does not ensure the orderly condition of the product.
  • Page 98 10-2...

  • Page 99: Maintenance And Upkeep

    Rules for maintenance intervals • Have the first maintenance performed by a HOBBY dealer 12 months after the initial registration. • Havve all further maintenance performed once annually at a HOBBY dealer.

  • Page 100: Ventilation

    Rules for greasing and oiling: • Have the swinging lever bearings greased after every 2,000 to 3,000 kilometers driven. • Grease the bearing spaces on the casing of the overrunning system. • Oil movable parts such as bolts and joints. •...
  • Page 101 Rules for cleaning the exterior: • Rinse the vehicle with a light stream of water. • Wipe the vehicle down with a soft sponge and typical shampoo solution. Rinse the sponge often in the process. • Afterwards, rinse with a great deal of water. •...
  • Page 102 Rules for damage repair: • All damage should be repaired immediately to avoid further damage from corrosion. Con sult your HOBBY dealer. Undercarriage The undercarriage of the camper has been specially coated. Any damage to the protective coating should be repaired immediately.

  • Page 103: Upkeep

    Windows and doors Rules for upkeep: • Rub the insulation of doors and windows lightly with talcum. • Only clean acrylic glass window panes with a clean, moist sponge and a soft towel. Dry cleaning can scratch the panes. Do not use strong and aggressive cleaners which contain softeners or solvents! Talcum is available in auto specialty...
  • Page 104 • Rub dry with a soft, dust-free cloth. • Use mild furniture polish. Do not use scouring solvents or intensive cleaners since these can scratch the surface! Rules for cleaning the toilet area: • Clean with neutral liquid soap and a non- scouring cloth.

  • Page 105: Winter Operation

    11.4 Winter operation Preparation Due to the overall vehicle conception, (aluminium sandwich construction with insulated windows) your camper is suitable for winter operation. WARNING: We recommend that you optimise your camper in accordance with your personal tastes for winter camping. Your dealer will gladly advise you in these mat- ters.
  • Page 106 Winter operation In the course of winter operation, condensati- on forms at low temperatures when the vehicle is occupied. Sufficient ventilation plays a very significant role in ensuring a suitable air quality within the vehicle and preventing damage by condensation. Rules for ventilation: •...
  • Page 107 After the end of the winter season Rules for upkeep: • Carry out a thorough undercarriage wash. This removes thawing agents (salts, lye resi- due). • Clean the exterior of the camper and use commercially available car wax to preserve steel parts.
  • Page 108 11-10...

  • Page 109: Waste Disposal And Environmental Protection

    12. Waste disposal and environmental protection 12.1 The environment and mobile travel Environmentally sound use By nature of their activities, camper users bear a considerable responsibility towards the environ- ment. Therefore, you should always use your camper in an environmentally sound manner. Rules for environmentally sound use: •...
  • Page 110 Rules for the disposal of faeces: • Only add approved cleaners to the faeces tank. The use of other cleaners can be avoided by the installation of an active charcoal filter system. Apply cleaning fluid very sparing- ly. Excessive application does not guarantee the prevention of odour build-up! Disposal: •...

  • Page 111: Technical Data

    13. Technical data 13.1 Tire pressure values As a rule of thumb, it may be assumed that a filled tire suffers a loss of pressure of 0.1 bar every two months. Check the pressure regularly to avoid damage to tires or a burst. Tire size Air pressure in bar 155 R 13 C 8PR...
  • Page 112 440 SF Excellent 1001 1060 1200 450 UF Excellent 1056 1200 460 UFe Excellent 1071 1130 1300 460 LU Excellent 1131 1190 1400 495 UL Excellent 1147 1206 1400 495 UFe Excellent 1155 1214 1400 500 KMFe Excellent 1183 1242 1400 540 UL Excellent 1209 1296 1500 540 UF Excellent 1218 1305 1500 540 UK Excellent 1230 1317 1500 540 WLU Excellent 1244 1331 1500...

  • Page 113: Basic Equipment

    610 UF Prestige 1443 1530 1800 650 KFU Prestige 1534 1621 1900 650 WFU Prestige 1529 1616 1900 650 UMFe Prestige 1497 1584 1900 650 KMFe Prestige 1510 1597 1900 690 SMF Prestige 1758 1845 2000 720 UML Prestige 1708 1795 2000 720 UMF Prestige 1716 1803 2000 720 UKFe Prestige 1740 1827 2000 750 UMF Landhaus 1967 2054 2200 750 UML Landhaus 1960 2047...

  • Page 114: Technical Data

    13.4 Technical data Handels- Techn. t.z.G. permit- zul. Achse Axle Auflauf- Zugholm Radbremse Trade name g.v.w.r. Leading Techni- Towbar Wheel cal desi- ted axle equipment brake bezeichnung Bez. [kg] Achslast einrichtung gnation load 400 SF 30 A 1100 1100 DB 13 M KFL 12 B One Piece 20-2425/1...
  • Page 115 Distance Length Reifengr. Radanschl. Fitting di- Wheel Felge Luft Ges.- Spur Stütz- Aufbau- Länge m. Ges.- Total Track Length Handels- Total Trade name Tire size towbar width length [bar] wheel of cara- mensions bezeichnung [bar] Breite weite Länge Gk u. Rl. länge + track wheel 195/70 R 14 5/112, ET 30 5½...

  • Page 116: Lighting

    13.5 Lighting 12 V Vehicle lighting Position Description Voltage Voltage exterior left blinker exterior right blinker exterior stationary light exterior brake light exterior license plate exterior silhouette lamp exterior side marker lamp exterior side marker exterior 3rd brake light 12 V Interior lighting Lamp Lighting Ceiling lamp, round, grey 1 x 21W Ceiling lamp, round, grey 1 x 21W 12 V halogen ceiling lamp 3 x 10W Panorama roof bonnet, upper 4 x 5W...

  • Page 117: Index

    Index Fit for a Speed of 00 km/h 03- Fixed tank 08-3 Accessories 0- Flaps Additional equipment 03-2 opening and closing 06- Additional loads 03-2 Forced ventilation 05- Automatic ignitor 09-6 Fresh water tank 08-2 changing the battery 09-6 Function electrical supply unit 07-6 Basic equipment 03-2, 3-3 Bed conversion 06-4...
  • Page 118 Toilet flap 05-6 Tread depth 04-2 Noises 03-6 Truma-Therme 08-3 Oiling 03-, - Undercarriage -4 Outer tent, guide rail 05-8 Upkeep 03-5, - Oven 09-6 Overrunning brake facilities 03-7 Valves 09- Ventilation -2 Parking space, selecting 02-8 Power supply 07-4 Warning triangle 02- Push-lock 06-2 Waste water tank 08-2...

Table of Contents

Save PDF