Related Manuals for Lauten Audio LS-208
Summary of Contents for Lauten Audio LS-208
- Page 1 LS-208 Overview and Operation Manual – Version 1.0 COPYRIGHT 2018 LAUTEN AUDIO LS-208 Front Address Large Diaphragm Condenser Voice & Instrument Microphone PRODUCT OVERVIEW & OPERATION MANUAL...
- Page 2 Constructed from high-quality components and outfitted with frequency shaping high and low-cut filters, the LS-208 comes with a spider shock mount great for broadcast, a hard mount for tight spots, a foam windscreen to protect from plosives, and a rugged road case housing all these accessories.
-
Page 3: Key Features
The LS-208 does not require pre-attenuation but can handle 135dB SPL due to its circuit design. Highly unique for a microphone of its type is its ability to capture a full 120db of dynamic range without the use of internal or external pre-attenuation. - Page 4 LS-208 Overview and Operation Manual – Version 1.0 COPYRIGHT 2018 LAUTEN AUDIO Operating Instructions Quick Start Guide/Sequence of Operation 1. Attach the microphone to its threaded hard mount or spider shock mount and tighten the wing nut. Attach the chosen mount to a high-quality microphone stand. Loosen the wing nut and adjust for proper pick up position.
-
Page 5: Power Requirements
LS-208 Overview and Operation Manual – Version 1.0 COPYRIGHT 2018 LAUTEN AUDIO Power Requirements This microphone requires +48v phantom power. Phantom power can be found as a built-in feature on most modern recording interfaces and microphone preamplifiers, or you may use an external +48v phantom power supply. -
Page 6: Specifications
LS-208 Overview and Operation Manual – Version 1.0 COPYRIGHT 2018 LAUTEN AUDIO Specifications Type: Front-Address Pressure gradient large diaphragm transducer microphone. Polar Patterns: Cardioid Circuit: JFET transistor with transformer balanced output Frequency Range: 20Hz-20KHz Dynamic Range: 135dB (Full Range >120dB) without the need of internal or external attenuation (15dB... -
Page 7: Care And Cleaning
Care and Cleaning THERE ARE NO SERVICABLE PARTS INSIDE THE MICROPHONE Only authorized Lauten Audio technicians should perform disassembly and maintenance on any part of this microphone. Disassembling and modifying any part of this microphone by anyone other than an authorized technician will void its warranty.
Need help?
Do you have a question about the LS-208 and is the answer not in the manual?
Questions and answers