Getting Started Remove the product from the box. Remove any packaging from the product. Please retain all packaging after you have checked and counted all the parts and the contents against the list. Package Contents Massage Gun ...
Page 3
When in use, sliding or transporting, please ensure that there are no people or pets nearby (the back, bottom, front and sides of the product), and that no foreign objects or pets inside the product, to avoid accidents. Please use well-grounding power supply suited to this product.
Page 4
Do not place it near fire or directly under the sun. When moved from a low-temperature storage to a warm temperature, the moisture inside the machine may affect, or damage its functionality. Please rest the product within room temperature for 1 hour before use.
Page 5
This product is not to be used for medical treatment purposes. Only one person at a time. Recommended usage time of this product is 10 minutes/session. Check if the voltage is suitable to the specification of this product. ...
Page 6
Description of Parts Operating instructions Charging 1. Remove the cover at the bottom of the holding-stand. 2. Insert the 9V adapter (included in the box) through the hole of the compartment and put back the cover.
3. The adapter jack will be fixed firmly on the charging base. 4. Plug the adapter into standard wall outlet and put the device on the charging base. 5. The charging LED indicator light (above the Power button) flashes red while it is charging, and it will turn to blue when it is fully recharged (the device cannot be used while recharging).
2. Long Press the Power button to turn On the device, blue light would illuminate. It will automatically enter LOW power mode; short press the Power button once to enter MEDIUM power mode; and short press the Power button again to enter HIGH power mode. These 3 intensity levels circulate and change in the said order by pressing the Power button.
Use lightly damp cloth to clean and then dry it. Solution of ordinary malfunctions It is normal if the motor makes noises during operation. If the rated working time is over, the power will automatically go off. If this product works continuously for too long, the temperature control will automatically turn off the machine.
- Reorient or relocate the receiving antenna. - Increase the separation between the product and receiver. - Connect the product into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. The device complies with Part 15 of the FCC Rules.
Page 11
SERVICE AND REPAIR: If service is required for this product, you should first contact Nuvomed Inc. Customer Service at info@nuvomed.us or by calling 1 (866) 815-4714, Monday to Friday 10am to 6pm EST. NOTE: Manufacturer cannot assume responsibility for loss or damage during incoming shipment. As a precautionary measure, carefully package the product for shipment, and insure it with the carrier.
Need help?
Do you have a question about the RX MG-2/0850 and is the answer not in the manual?
Questions and answers
how can order the nuvomed mg-2/0850 massage gun