Table of Contents
Advertisement
SINGLE PIN HANDLE PADDLE BRAKE ACTUATOR ASSEMBLY
(NO. 13A-C, 15A-C AND 17 HANDLES)
Note: If your hand truck model uses any of the handles listed above, you must purchase a brake handle ver-
sion of that handle if the handle does not have the welded slotted stub (see part labeled STUB below).
Handle Description (handle sold separately)
Handle No. 13A straight loop with cross brace and single pin with brake - 52"
Handle No. 13B straight loop with cross brace and single pin with brake - 55"
Handle No. 13C straight loop with cross brace and single pin with brake - 60"
Handle No. 15A vertical loop with brake for straight braced frames - 52"
Handle No. 15C vertical loop with brake for straight braced frames - 52"
Handle No. 17 straight loop handle with pistol grip for brake
Item
A
Spacer - 1/4" ID x 5/16" long
B
Brake lever assembly
C
Pan head machine screw - 1/4"-20 x 1-1/4" long
D
Hex locknut - 1/4"-20
E
Stub collar for 13, 15 and 17 handles
Parts A-E provided in single pin handle brake conversion kits 304162 and 304163.
1. Remove all four existing pan head machine screws and locknuts on each side of the hand truck handle
using the #2 Phillips head screwdriver and the 7/16" wrench.
2. Pull out the old handle and replace with the new handle with the welded slotted stub. Secure the new
handle with the previously removed handle mount screws and locknuts. Firmly tighten the screws with the
#2 Phillips head screwdriver and the 7/16" wrench.
3. Insert the steel bushing (A) in the largest endmost hole in the brake lever assembly (B) and position the
assembly in the slot of the handle stub. Hold the handle in place while sliding the stub collar (E) in place
over the end of the stub.
4. Insert the 1/4"-20 x 1-1/4" long pan head machine screw (C) through the stub and lever assembly and
secure with the 1/4"-20 locknut (D) using the #2 Phillips head screwdriver and the 7/16" wrench.
6
Description
D
Qty.
Part No.
1
304058
1
304065
1
80104
1
80675
1
304137
E
B
Figure 5
Part No.
300986
301003
300987
300988
300979
301169
STUB
A
C
Advertisement
Table of Contents
Need help?
Do you have a question about the Y-Cable and is the answer not in the manual?
Questions and answers