Related Manuals for HunterDouglas Platinum
Summary of Contents for HunterDouglas Platinum
- Page 1 ™ PL ATINUM TECH NO LOGY Remote Control Guide for PowerRise ® , PowerGlide ® , PowerTilt ™ and hard-wired systems...
- Page 2 Control Like Never Before ™ Platinum Technology utilizes both infrared (IR) and radio frequency (RF) remote control signals. This guide shows you how to enjoy optimal performance using the two methods of operation. The Hunter Douglas Remote Control INDICATOR LIGHT...
- Page 3 Getting Started ™ Using the power of Platinum Technology is easy. In just two simple steps, your remote is ready. PROGRAM BUTTON POWER UP Remove the battery compartment cover on the back of the remote control. Insert two AAA alkaline batteries as diagrammed inside the battery compartment.
- Page 4 Point the remote at the satellite eye. TILT AND TRAVERSE Move the channel switch to the left position (channel 1) to tilt the vane. Move the channel switch to the right position (channel 2) to traverse the window covering. hunterdouglas.com...
- Page 5 (either built into the headrail or on a satellite eye) of the window covering and press the UP button. The unit will raise or “jog” to show that it has been programmed into the remote control. Repeat steps to program other window coverings. hunterdouglas.com...
- Page 6 ALL GROUPS BUTTON To operate all four groups of window coverings at the same time, press the ALL button before pressing the UP or DOWN button. hunterdouglas.com...
- Page 7 “jog” to show that it has been removed. MASTER RESET BUTTON To erase all programmed groups, use a paper clip to press and quickly release the MASTER RESET button located next to the batteries. Replace the battery compartment cover. hunterdouglas.com...
- Page 8 Refer to the Product Owner’s Guide for further details about ™ Platinum Technology. © 2007 Hunter Douglas Inc. ® Registered trademark of Hunter Douglas Inc. ™Trademark of Hunter Douglas Inc. Patented in the U.S. and foreign countries. Other U.S. and foreign patents pending. 5110540027 8/07...
Need help?
Do you have a question about the Platinum and is the answer not in the manual?
Questions and answers
How to set the shade open and close limits
To set the open and close limits for HunterDouglas Platinum shades:
1. Press and hold the Auto button for 3 seconds to return to the main display screen.
2. Set the desired open time (e.g., 6:15 a.m.) and close time (e.g., 5:30 p.m.) for the desired days (e.g., Monday, Tuesday, Wednesday).
3. After setting the times, press the Auto button again so that “Auto” appears on the screen. This activates the timer function.
4. The shades will now open and close automatically at the set times on the selected days.
This answer is automatically generated