Advertisement
Quick Links
Ohio - Coffee Table
Assembly Instructions -
Dimensions
Width - 120cm
Depth - 49.5cm
Height - 37.5cm
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Please keep for future reference
309/5256
MADE IN
BRITAIN
Issue 1 - 16/10/14
Advertisement
Related Manuals for Argos Ohio 309/5256
Summary of Contents for Argos Ohio 309/5256
- Page 1 Ohio - Coffee Table Assembly Instructions - 309/5256 Please keep for future reference Dimensions Width - 120cm Depth - 49.5cm MADE IN Height - 37.5cm BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 Issue 1 - 16/10/14...
- Page 2 Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 25kgs. space to layout the parts before recommend the Please lift with care. starting.
- Page 3 If you have damaged or missing components, call the Components - Panels Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the panels listed below Left Side Right Side Divider Fascia (D1773B) (D1774B) (D1775B) (D1781A) (350 x 419mm) (350 x 419mm) (255 x 417mm)
- Page 4 If you have damaged or missing components, call the Components - Fittings Customer Helpline: 08456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
- Page 5 If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 08456 400800 quoting the reference numbers below Step 1 Prepare the drawer fronts Screw 2 metal dowels into the holes shown on the back of the left drawer front and the right drawer front...
- Page 6 Assembly Instructions Step 4 Fit the drawer base Slide the drawer base down the grooves in the drawer sides and down into the groove in the drawer front Step 5 Fit the drawer back Fit the drawer back between the drawer sides Make sure that the drawer base...
- Page 7 Assembly Instructions Step 8 Runners must be pushed up against Fit runners to the the drawer front drawers Turn the drawer assemblies over. Fit the runner to the bottom edge of the left drawer side , as shown, making sure that it is pushed up against the back of the drawer front...
- Page 8 Assembly Instructions Step 10 screw screw screw Prepare the left side Fit a runner the left side The 1st screw uses the 1st hole in from the front of the runner. The 2nd and 3rd screws use the holes that line up with the other panel holes.
- Page 9 Assembly Instructions Step 11 Fit 2 fascia panels to the left side Push the left side down onto a fascia panel Use a screwdriver to tighten the 2 large locking nuts fitted to the left side Note: Turn the large locking nuts as far as they will go - more than...
- Page 10 Assembly Instructions Step 12 Prepare the right side screw screw screw Fit a runner the right side The 1st screw uses the 1st hole in from the front of the runner. The 2nd and 3rd screws use the holes that line up with the other panel holes.
- Page 11 Assembly Instructions Step 13 Fit 2 fascia panels to the right side Push the right side down onto a fascia panel Use a screwdriver to Dowels tighten the 2 large this end locking nuts fitted to the right side Push a fascia panel down onto the right side Use a screwdriver to...
- Page 12 Assembly Instructions Step 14 Prepare the 2 horizontals Insert 4 large locking nuts into each of the 2 horizontals Tap 2 wooden dowels into each of the 2 horizontals Step 15 Fit a horizontal onto the left side Push a horizontal p l a onto the left side i n c...
- Page 13 Assembly Instructions Step 17 Prepare the divider screw screw screw Fit a runner the divider The 1st screw uses the 1st hole in from the front of the runner. The 2nd and 3rd screws use the holes that line up with the other panel holes.
- Page 14 Assembly Instructions Step 18 Fit a back Push a back onto the left side Use a screwdriver to tighten the large locking fitted to the back Step 19 Fit the divider Push the divider onto the horizontal back Use a screwdriver to tighten the 3 large locking nuts fitted to...
- Page 15 Assembly Instructions Step 21 Prepare the plinth Insert 2 large locking nuts into the plinth Tap 2 wooden dowels into the plinth Step 22 Fit the back Push the other back onto the divider Use a screwdriver to tighten the large locking fitted to the back Step 23 Fit the plinth...
- Page 16 Assembly Instructions Step 24 Fit the right side Push the right side onto the assembly. Use a screwdriver to tighten the 4 large locking nuts fitted to the horizontal , plinth and back Step 25 Fit the 5 plastic nails Tap 2 plastic nails into the bottom edge of each of the sides...
- Page 17 Assembly Instructions Step 26 Prepare the top Screw 6 metal dowels into the top Step 27 Fit the top Carefully stand the unit up for this step. Push the top down onto the assembly. Use a screwdriver to tighten the 6 large locking nuts fitted to the left side...
- Page 18 Please refer back to Step 1. If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800 and quote the reference numbers on the component pages. Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW...
- Page 20 ALR3079...
Need help?
Do you have a question about the Ohio 309/5256 and is the answer not in the manual?
Questions and answers