Media Specific Adjustments - Canon imageRUNNER ADVANCE C9075S PRO Customer Expectation Document

15.2 Media Specific Adjustments

The media specific adjustments are for customers who want to precisely adjust the
image quality and front-to-back registration per paper type that is registered in the
machine.
The following settings can be manually adjusted by customers through the Settings
Editor > Media > select a registered media type > Printer adjustment. However, if
media adjustments must be made, it is recommended to first use the Image
Location Wizard from the machine's operator panel.
The table below describes the Printer adjustment settings and each setting's
description.
Setting
Registration: Front and Back
X shift (mm or inch)
Y shift (mm or inch)
X elongation (0.01%)
Y elongation (0.01%)
Advanced
Decurl
Output face down
Output face up
Pick up air
Secondary transfer voltage
Front/Back
Trail end white patch correction
Front/Back: Threshold/Amount
Version 1 imageRUNNER ADVANCE C9075S PRO Customer Expectations Document
Description
Make a fine adjustment to enable printing with the correct
alignment of the image from the leading edge of the paper
in the feed direction.
(From ±500)
Make a fine adjustment to enable printing with the correct
alignment of the image from the side edge of the paper
perpendicular to the feed direction.
(From ±500)
Make a fine adjustment to the image size in the feed
direction. (From ±100)
Make a fine adjustment to the image size perpendicular to
the feed direction. (From ±100)
Make a fine adjustment to the paper curl level when the
output is face down or face up in millimeters or inches.
(From ±10)
Make an adjustment to the paper separation fan level if
feeding or uneven transfer problems from the optional
side paper deck occur. (From ±5)
Make an adjustment to the secondary transfer bias (on
the front and back sides of the paper) if any faulty images
with uneven densities or color fading appears.
(From ±10)
Make an adjustment to improve the white patch/fading at
the trail end of the paper.
Threshold: From ±10
Amount: From ±20
Page 49