Select The Spin Speed Or Option; Select The Programme; Start The Machine; At The End Of The Programme - Zanussi W 1042 W Instruction Booklet

4. Select the spin speed or option

or
Turn the dial to the required position.

5. Select the programme

Turn the programme selector dial clockwise to the
programme K.

6. Start the machine

Before starting up the machine check that:
the appliance is plugged in
the water supply taps are turned on
the drain hose is correctly and securely positioned
the door and the detergent dispenser drawer are
closed.
Depress the ON/OFF button: the mains-on light will
illuminate and the machine starts operating.

7. At the end of the programme

The machine stops automatically.
If you have selected the RINSE HOLD option
machine will stop with the water of the last rinse left in
the tub, to prevent the fabric from creasing. To drain
only, select position
To drain and spin, select programme "M" or turn the
spin speed selector dial to the desired speed position: the
machine will spin at the selected speed.
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF
button again. The mains-on light goes out.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
9
or the drain programme "S".
, the