Preparation For Disassembly; Bottom Cover - HP Spectre x360 14 Maintenance And Service Manual

Preparation for disassembly

Bottom cover

To remove the bottom cover, use this procedure and illustration.
Table 5-1 Bottom cover descriptions and part numbers
Description
In natural silver finish
In nightfall black finish
In Poseidon blue finish
Before removing the bottom cover, prepare the computer for disassembly
on page 37).
Remove the bottom cover:
1. Close the computer and position it upside down with the front toward you.
2. Remove the rear rubber foot strip (1).
The rear rubber foot strip is available using the following spare part numbers:
M22169-001: In natural silver finish
M22168-001: In nightfall black finish
M22170-001: In Poseidon blue finish
3. Remove the four Phillips M2.0 × 6.9 screws (2) and the two Torx5 M2.0 × 3.9 screws (3) that secure the
bottom cover to the top cover.
ENWW
Spare part number
M22148-001
M22147-001
M22149-001
(Preparation for disassembly
Component replacement procedures 37