Kenwood DDX9020DABS Instruction Manual page 72

Setup
Ñ
Touch panel adjustment
1
Touch [Touch Panel Adjust] on the User
Interface screen.
h Touch Panel Adjust screen appears. h
2
Follow the instruction on the screen and
long touch the center of each [
1
NOTE
• To cancel the touch panel adjustment, touch
[Cancel].
• To reset it to the default, touch [Reset].
Ñ
Adjust the date and time
manually
1
Touch [Clock] on the User Interface screen.
2
Select [Manual].
3
Touch [Time Zone] on the User Interface
screen.
4
Select the time zone.
5
Touch [Clock Adjust] on the User Interface
screen.
6
Adjust the date, then adjust the time.
7
Touch [Set].
72
Ñ
Learning function of steering
remote
This function is available only when your
vehicle is equipped with the electrical steering
remote controller.
If your steering remote controller is not
compliant, learning may not be completed
].
and error message may appear.
1
2
Touch [Steering Remote Controller] in
the User Interface screen.
h Steering Remote Controller Setting h
screen appears.
2
Press and hold the steering remote
controller button.
NOTE
• You can have the unit learned all buttons
3
Touch the function you want to set.
4
Repeat steps 2 and 3 as necessary.
at a time. In that case, press all buttons one
at a time and after pressing all of them,
touch [Learning completed] in Steering
Remote Controller Setting screen. However,
new functions cannot be learned after this
operation.