Table of Contents
Advertisement
Installing your refrigerator
Bringing it all together
Door Reverse
1. Remove the hinge cover and the screws from the hinge bracket, take it o and remove the fridge door
by li ng it up and away.
Screw cap
cover
2. Remove the screw cap covers that are on the top
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271 .
of the unit and
them on to the opposite side.
Installing your refrigerator
Hinge cover
Hinge
19
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the M50142FFW and is the answer not in the manual?
Questions and answers
The motor of our M50142ffw is running but it is not chilling. Recently moved the machine but have left it for 24hrs to settle. Had not been used for a while previously. Can you advise please?
If the Bush M50142FFW motor is running but not chilling, possible causes may include:
1. Blocked air vents – Air circulation may be restricted, preventing cold air from reaching all areas.
2. Incorrect temperature setting – Ensure the thermostat is set to the correct cooling level.
3. Dirty condenser coils – Dust or debris on the coils can reduce cooling efficiency.
4. Door not closing properly – Warm air may enter if the door seal is damaged or obstructed.
5. Overloading – Too many items can block airflow inside the fridge.
Check these areas and refer to the Troubleshooting section of the manual for further guidance.
This answer is automatically generated