CG Antenna CG-3000 Manual

CG Antenna CG-3000 Manual

Automatic antenna tuner

Advertisement

Quick Links

CG-3000 AUTOMATIC ANTENNA TUNER

INTRODUCTION

CG-3000 automatic antenna tuner (ATU) can cover whole HF amateur
bands. It uses multi signal processing circuit to switch L/C to make perfect
matching between your radio and antenna system. Fast tuning, less than 2
seconds for first initialize matching. 200 memory channels store the
minimum SWR value to make further tuning.

SPECIFICATION

Working frequency:
Input impendence:
Max. input power:
Min. inp ut power:
Power supply:
Current drain:
Auto tuning time:
Memory channels:
Usable wire length:
* All specifications are subject to change without notice or obligation
1.6-30 MHz (50 MHz not guaranteed)
50 ohm
200W PEP
10W
13.8V +/- 10%
< 0.8 A
Approx. 2 sec. (first time tuning)
< 0.2 sec (return to memorized frequency)
200
6 – 30 Mhz
> 2.4 meters
1.6 – 30 Mhz > 8 meters

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CG-3000 and is the answer not in the manual?

Questions and answers

Summary of Contents for CG Antenna CG-3000

  • Page 1 CG-3000 AUTOMATIC ANTENNA TUNER INTRODUCTION CG-3000 automatic antenna tuner (ATU) can cover whole HF amateur bands. It uses multi signal processing circuit to switch L/C to make perfect matching between your radio and antenna system. Fast tuning, less than 2 seconds for first initialize matching.
  • Page 2 3. Connect the transmission cable to transceiver. 4. Connect the control cable 5. Mount the CG-3000 to desired location. l Never use the system without reliable ground connection. l Never transmit or tune without an antenna. It will damage your tuner High voltage! Do not touch the antenna when it’s transmitting or tuning...
  • Page 3 After verify all the connection, choose your desired frequency and switch the transmit mode to AM, PACKET or any other continuous mode. Press PTT key, CG-3000 will automatically tune. You will hear some “click click” noisy, it means CG-3000 is tuning.
  • Page 4 Ground system The CG-3000 must be connected to a good electrical ground. Good ground prevents shocks, interference and others. Use heaviest gauge wire or metal strap available to connect to as large as possible metal object. Install a quarter wave length of working frequency wire as counterpoise.
  • Page 5 If return for repair is needed, please wrap and pack your unit well to protect damage during transportation or handling. Include a note with your name, address, phone number, email and brief description of the problem. *CG antenna and our distributors can not be responsible for unit lost or damage in shipping.

Table of Contents

Save PDF