Initialise; Open - Assa Abloy LOCKWOOD SMARTair TS1000 Manual

Initialise

Initialising an Escutcheon or Reader requires that Escutcheon or Reader to be configured in the 'Doors' Menu of the TS1000 Software, Users
assigned and a Locking Plan created. This information can then be sent to the Portable Programmer and then downloaded from the PP into the
specific item in the field.
When a product is initialised, it will lose any previous information it may have stored.
Select the "Initialise" function in the Doors menu and press "OK". A screen, as per the below example, will be displayed showing all the Doors
downloaded from the TS1000 software, including their descriptions as programmed in the TS1000 'Doors' menu.

Open

The Open function allows the Portable Programmer to open Escutcheons and Readers, whether due to a low Battery condition in the unit or
emergency situation.
Using the Up and Down cursor keys, select the 'Open' function in the Doors menu of the Portable Programmer. Press the "OK" key and the
Portable Programmer opens the door. As previously explained, the Authorisation Key must be inserted in the Portable Programmer to perform
this function.
9
™
Lockwood SMARTair Portable Programmer
assaabloy.co.nz
The screen shows a list of all the doors of the installation. With the Up and
Down cursor keys, select the door that we want to initialise and, with the
authorisation key inserted in the PP, press the "OK" key to start initialising.
Once this process is complete, a message
om the PP will appear stating that the
operation has been carried out successfully.
Press  (F5) to accept and go back to the
main menu of the Portable Programmer.