Silca SBB Operating Manual
  1. Manuals
  2. Brands
  3. Silca Manuals
  4. Motherboard
  5. SBB
  6. Operating manual

Silca SBB Operating Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Operating manual
D432985XA
3.0
vers.
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SBB and is the answer not in the manual?

Questions and answers

Related Manuals for Silca SBB

Summary of Contents for Silca SBB

  • Page 1 Operating manual D432985XA vers. ®...
  • Page 2 This manual has been drawn up by SILCA S.p.A. All rights reserved. No part of this publication may be reproduced or used in any form or by any means (photocopying, microfilm or other) without the written permission of SILCA S.p.A. Published: March 2007 Printed in Vittorio Veneto by SILCA S.p.A.

  • Page 3: Table Of Contents

    INDEX MACHINE DESCRIPTION ......................2 MAIN CHARACTERISTICS ....................2 TECHNICAL DATA ........................ 3 WORKING PARTS ......................... 4 SYMBOLS ..........................5 TRANSPORT ..........................6 PACKING ..........................6 UNPACKING ......................... 6 HANDLING ..........................6 ACCESSORIES PROVIDED .....................7 INSTALLATION AND PREPARATION ..................7 PREPARATION FOR USE - INITIAL OPERATIONS ............7 CHECKING FOR DAMAGE ....................
  • Page 5 The machine turns on automatically when the connection (OBD II or Optional) is connected to the diagnostics socket or one of the feeder wires supplied with the machine is used. IDENTIFICATION OF THE SBB DEVICE The device has an identification plate showing its serial number (fig. 1).

  • Page 6: Machine Description

    MAIN CHARACTERISTICS OPERATING METHODS - Adds or deletes keys and remote controls from the immobilizer control unit by connecting SBB to the vehicle diagnostics input. SPECIAL FUNCTIONS - Storage in the User Data Archive of all operations carried out;...

  • Page 7: Technical Data

    Use a credit that is reduced every time key programming/deletion is carried out. Credits can be purchased and loaded onto SBB by means of a smart card (see chapter “Enabling”). SOFTWARE UPDATE The machine can be updated through an RS232 serial line connection with a personal computer.

  • Page 8: Working Parts

    D - Serial Port RS232 (9 Poles) use only for Serial cable E - Socket for cigarette lighter power cable or feeder F - Standard OBD II cable G - Cigarette lighter power cable H - Feeder J - Serial cable Copyright Silca 2006...

  • Page 9: Symbols

    GRAPHICS TEST menu (73) either use the arrows to select first the TEST menu (7), press ENTER, then the GRAPHICS menu (3) and press ENTER, or digit (73) which corresponds to the GRAPHICS TEST (73). Copyright Silca 2006...

  • Page 10: Transport

    - 1 serial cable; - 1 power supply cable with cigarette lighter plug; - 1 set of documents: user’s manual, guarantee form and user’s agreement; - 1 CD program HANDLING Always replace the machine in its carrying case after use. Copyright Silca 2006...

  • Page 11: Accessories Provided

    ATTENTION:the RS232 socket for connection to the PC is located on the front, near the display. Use the RS232 serial cable provided and follow the instructions for updating. REGULATION AND GAUGING The machine is designed not to require any gauging or regulation. Copyright Silca 2006...

  • Page 12: Using The Machine

    USING THE MACHINE This chapter describes all the operations required to memorize, erase, or add keys to the centralized immobilizer unit by connecting SBB to the vehicle diagnostics input. START-UP When the machine is turned on the display shows the logo: ®...

  • Page 13: Password (Memorized)

    This function contains the database of vehicle makes / models / years for which the device is enabled and can carry out the specific functions involved. - Select “IMMOBILIZER/REMOTE CONTROLS”; from the MAIN MENU to view a list of car makes on the display. - MENU IMMOBILIZER - AUDI SEAT SKODA > VOLKSWAGEN OPEL FORD Copyright Silca 2006...

  • Page 14: Selecting The Car Make

    (see chap. 9 "HELP MENU", page 31). 6.4.1 SELECTING THE CAR MAKE SBB is not always able to automatically recognize all the immobilizer central units and is therefore unable to automatically choose the communication procedure to launch. It is therefore NECESSARY to select the right MAKE MODEL ANY OTHER CHARACTERISTICS (Petrol, Diesel, red key system, etc.) to which...

  • Page 15: Communication Procedure With The Immobilizer

    Insert password from menu ENABLE FLAGS (41) 6.5.1.2 ENABLED VEHICLE MODEL If the function is enabled the following message appears: Turn the ignition on! Press any key... - Turn the key to the ON position. Press any key. Copyright Silca 2006...

  • Page 16: Communication Procedure For Pin Code Reading

    This is a 7-digit code issued by the dealer. How to apply for the code: - Use the function “READ IMMO ID” in SBB to read the series number of the central unit. - Provide the authorized dealer with the following data: •...

  • Page 17: Dealer

    6.5.2.4 PIN 4 This is the 4-digit code to enter as PIN CODE on the SBB during the “PROG.NEW KEYS” or “No. KEYS MEM.” stages. It is calculated by the device when the other codes are known: Code7, Dealer Code, Importer Code and date of issue.

  • Page 18: Hyundai ® / Kia ® Pin Code

    This is usually found in the vehicle logbook or stamped on a metal plate located inside the bonnet. - Insert the PIN CODE. - The display will show: - HYUNDAI/KIA PIN CODE - PIN CODE: XXXXXX Press any key... - Press any key to return to the “PIN CODE SERVICE” menu. Copyright Silca 2006...

  • Page 19: Setup

    - Select TOKEN to view the tokens available; further tokens can be loaded. - Select and press ENTER. ENABLING MAKES (FUNCTION AVAILABLE ONLY FOR SBB FULL LOAD DEVICES) After selecting the menu “IMMOBILIZER or REMOTE CONTROLS” the display will show: - ENABLING - >...
  • Page 20 After selecting the “TOKEN” menu the display will show: - ENABLING TOKEN - TOKEN AVAILABLE Date of last loading YY/YY/YYYY XX = Tokens still available YY/YY/YYYY = Date of last loading of tokens F5 = Function key for unloading tokens from the smart card Copyright Silca 2006...
  • Page 21 Press any key... Press any key to return to the previous menu. If the credits have not been successfully transferred from the SMART CARD to SBB, the display will show one of the following errors: ERROR ERROR MESSAGE ON DISPLAY...

  • Page 22: Language

    6.6.5 VERSION This function is used to view the FIRMWARE / SW / DATABASE version on the device. - Select the item “VERSION” from the “Setup” menu: - SBB - Ver. (SW): XXX.XX.XXX Ver. (DB): XX.XX Release : XXXXXXX Copyright Silca 2006...

  • Page 23: Memorize Password

    - Select ESC to quit. 6.6.7 KEYS REFERENCES This option can be used to view the Silca or Ilco keys references on HELP F1 menu. - Select the item “KEYS REFERENCES” from the “Setup” menu; the display will show: - KEYS REFERENCES -...

  • Page 24: Printout

    4567 IMMO ID: (F1) Use the keys to view the user data in sequence (depending on the search selected). - Press key F1 to view the IMMO ID. 6.7.2 PRINTOUT At present this function is not active. Copyright Silca 2006...

  • Page 25: Archive Erase

    This function is used to test operation of the display in the GRAPHICS mode. - Select “GRAPHICS” from the “TEST” menu and check that all the pixel on the display are illuminated. - Press a key to quit. Copyright Silca 2006...

  • Page 26: Update Switch Can

    This function is used for manual updating of the internal software for the CAN BUS SWITCH. - Select "UPDATE CAN BUS SWITCH" from the “TEST” menu. - The display will show: OPTIMIZATION IN PROGRESS Updating of the SWITCH CAN BUS start now. When updating is complete the SBB re-starts automatically. Copyright Silca 2006...

  • Page 27: Model Change

    MODEL CHANGE Use the SMART CARD “MODEL CHANGE” (optional) to enable the software for a given machine. To do so, insert the SMART CARD “MODEL CHANGE” into the SBB device before turning it on (see fig. 6). Fig. 6 - Turn on the machine.

  • Page 28: Warning/Error Messages

    Check that you have selected the right makemodel. ERROR MESSAGE 4 NOT VALID - This message appears when the PIN CODE entered is not properly composed or is not recognized by the immobilizer. Copyright Silca 2006...
  • Page 29 - Press any key to continue. - PROG.NEW KEYS - Procedure interrupted Keys memorized before procedure started are enabled Press any key... - All the keys memorized before programming started are still enabled for operation. - Press any key to continue. Copyright Silca 2006...
  • Page 30 - Press any key to continue - PROG. NEW KEYS - Procedure interrupted Keys memorized before procedure started are enabled. Press any key... - All keys memorized before programming started are still enabled for operation. - Press any key to continue Copyright Silca 2006...
  • Page 31 - Press any key to continue. - PROG. NEW KEYS - Procedure interrupted Keys memorized before procedure started are enabled. Press any key... - All keys memorized before programming started are still enabled for operation. - Press any key to continue. Copyright Silca 2006...
  • Page 32 Press any key... - If errors are found in the immobilizer, programming cannot take place. - Delete the errors using the “DELETE ERRORS” function, then repeat programming. - Press any key to continue Copyright Silca 2006...
  • Page 33 Rem.ctrl alr. acquired Repeat the procedure Press any key... The remote control to be programmed is already in the memory and operational. - Use a remote control not yet programmed and repeat programming. - Press any key to continue. Copyright Silca 2006...
  • Page 34 Some errors have occurred during programming. Repeat programming, making sure that the remote control to be programmed is the right one and operational, and that the immobilizer system has no operational anomalies (use the reading errors function). Press any key to continue. Copyright Silca 2006...

  • Page 35: Help Menu

    - Self P.: description of the direct programming procedure. NOTE: correspondence of the original transponder to the Silca key to be used should be checked with the RW2/RW3 for the type of transponder.
  • Page 36 - Select ESC to quit. Press the “F4” function key, the display will show a description of the position of the connector: - POSITION - Remove the cover situated at the side of the hand brake - Select ESC to quit. Copyright Silca 2006...

  • Page 37: Maintenance

    - Detach any other wires connected to the machine; - Remove the 4 screws located on the back of the machine; - Remove the cover carefully, paying attention to the wiring; - Check that all the connectors are properly in place. Copyright Silca 2006...

  • Page 38: Waste Disposal

    • For information about the collection system for such appliances please contact SILCA S.p.A. or another subject registered in the various National Rolls for other countries in the European Union. Household waste (or of similar origin) can be included in the separate collection system for urban waste.

  • Page 39: Assistance

    The guarantee attached to the machine ensures free repairs or replacements of faulty parts within 12 months of purchase. All other service calls must be arranged by the customer with Silca or with a Silca service centre. Copyright Silca 2006...
  • Page 41 Vittorio Veneto VITTORIO VENETO 21/06/2006 CE DECLARATION OF MACHINE COMPLIANCE SILCA S.p.A. - VIA PODGORA 20 ( Z.I.) 31029 VITTORIO VENETO (TV) - (ITALY) TEL. 0438 9136 - FAX. 0438 913800 Declares under its own responsibility that the Universal Diagnostic Device model...
  • Page 42 E-mail: info@silca.de In France SILCA S.A. 78440 PORCHEVILLE Tel. 01 30983500 Fax 01 30983501 E-mail: info@silca.fr In Spain SILCA KEY SYSTEMS S.A. C/Santander 73A BARCELONA - SPAIN Tel. 0034 934981400 Fax 0034 932788004 E-mail: silca@silca.es Members of the Kaba Group...

This manual is also suitable for:

D432985xa

Table of Contents