Printer Troubleshooting - Canon PIXMA iP110 Manual

Printer Troubleshooting

You can check the status of the printer by the POWER and Alarm lamps.
 POWER lamp is off: The power is off.
 POWER lamp lights: The printer is ready to print.
 POWER lamp flashes: The printer is getting ready to print, or printing is in progress.
 Alarm lamp flashes: An error has occurred and the printer is not ready to print.
 POWER lamp flashes and Alarm lamp flashes alternately: An error that requires
contacting the service center may have occurred.
When an error occurs in printing, such as a paper jam or empty ink cartridge, the orange light
on the Alarm lamp will flash. The table on the next page will guide you through
troubleshooting some basic printer issues.
Figure 1
If, after taking appropriate action, the printer is still not working, contact your Case Manager
to forward a request for a new printer.
Please note that the printer may make noise when it is turned on. Allow a few minutes for it
to boot up and it should print quietly and without issues. If the noise persists or is
uncharacteristically loud, notify the Case Manager.
6