Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Pure Clean PUCRC25
Summary of Contents for Pure Clean PUCRC25
- Page 1 PUCRC25 Mini Robotic Vacuum Cleaner...
-
Page 2: Table Of Contents
TABLE OF CONTENTS SAFETY INSTRUCTIONS * BATTERY AND RECHARGING INSTRUCTIONS PRODUCT FEATURES MAIN BODY AND ACCESSORIES BATTERY INSTALLATION AND REMOVAL RECHARGING BATTERY GENERAL OPERATION * STARTING OPERATION SIDE BRUSH INSTALLATON CLEANING AND MAINTENANCE *CLEANING DUST BIN *CLEANING INTAKE TROUBLESHOOTING www.PyleUSA.com... -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS Read the safety instructions before operating Mini Robotic Vacuum Cleaner and keep this manual handy for your future reference. Observe the basic safety rules to prevent any occurrence of re, electric shock and personal injury. 1. Do not operate Mini Robotic Vacuum Cleaner outdoors. 2. -
Page 4: Battery And Recharging Instructions
NOTE: Take out or remove the packing foam from behind the front bumper before using the Robotic Vacuum Cleaner. BATTERY AND RECHARGING INSTRUCTIONS 1. The battery is rechargeable, please use the voltage and current speci ed on the packing. If you are not sure of the voltage and current of your house, please contact the seller or local power company of a licensed electrician. -
Page 5: Main Body And Accessories
MAIN BODY AND ACCESSORIES Main Body x 1 Rechargeable Battery x 1 Adapter x 1 Filter x 1 User Manual x 1 Side brush x 2 MAIN BODY AND ACCESSORIES Bumper Inner Dustbin Top Cover Switch ON/OFF www.PyleUSA.com... -
Page 6: Battery Installation And Removal
Front Wheel Bumper Side Brush Anti Drop Sensor Vacuum Intake Wheel Battery House BATTERY INSTALLATION AND REMOVAL 1. Before installing or removing the battery, the product must be disconnected from the power source. 2. Open the battery cover. 3. Insert the battery into the battery cabinet and close the cover. Make sure the cover clips well Iocated in its position. -
Page 7: Recharging Battery
RECHARGING BATTERY 1. Before charging, make sure the battery is correctly installed. 2. The procedure of charging the product is as follows: rstly, connect the adapter output into the DC jack, and then plug into power socket of the other end, a blue light will ash. 3. -
Page 8: General Operation
GENERAL OPERATION Starting Operation 1. Place the product in a room with much free space, and then power it on to do cleaning work. 2. When the product runs out of power, the LED indicator in the illumination ring will turn red which the product will stop working. Note: *This product is not suitable for long-pile carpets SIDE BRUSH INSTALLATION Put the L side brush at L place and R side brush at R place on the bottom and... -
Page 9: Cleaning And Maintenance
CLEANING AND MAINTENANCE Cleaning Dust Bin 1. Open the upper cover by lifting the lid near the power on/o button 2. Put your nger into the dust bin groove and grip to take it out www.PyleUSA.com... - Page 10 3. Open the lid of dust bin. 4. Take out the inner lter. 5. Empty the dirt in the dust bin. www.PyleUSA.com...
- Page 11 6. Rinse the dust bin with tap water. Do not wash it in washing machine, dish washing machine or other machine. 7. Periodically clean the lter with a soft bristle brush 8. Reinstall the lter and the dust bin lid once they get dried 9.
-
Page 12: Cleaning Intake
Cleaning Intake After repeated use for some time, dirt and dust might accumulate around the intake of the product. To ensure its best cleaning e ciency and constant air ow its should be cleaned periodically. 1. Remove the external power source. 2. -
Page 13: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION 1. Battery low condition 1. Recharge the battery Red LED stays after 2. Main body is picked up 2. Re-place the robot on power on the oor 1. Clean the dust bin 1. The dust bin is full Vacuum is on but 2. - Page 14 Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.com...
Need help?
Do you have a question about the PUCRC25 and is the answer not in the manual?
Questions and answers
Cuál es el cargador adecuado para esta aspiy
The appropriate charger for the Pure Clean PUCRC25 vacuum is a Lithium Battery Adapter with an output of DC 13V, 800mAh. It supports an AC input voltage of 100-240V and is designed as a replacement charger for the PUCRC25 model.
This answer is automatically generated