Kenwood KCA-HX5M Instruction Manual page 13

Helmet
Installation
Using the
Glued Surface
Mounting
Adapter
Switching the
Microphone
Earbuds
External Mesh
Intercom
Antenna
KCA-HX5M EN
2. INSTALLING THE
HEADSET ON
YOUR HELMET
NOTE
• Make sure that the microphone is located properly
close to your mouth when you wear the helmet.
Adjust the direction of the microphone so that the fin
side of the microphone is facing outward, away from
your lips.
3. Attach the headset main unit to the clamp unit. Slide
the main unit down onto the clamp unit until it clicks
firmly into the bottom portion of the clamp unit.
To remove the main unit from the clamp unit, press the Quick
Release Button to slide it off the clamp unit.
Fin
Motorcycle Bluetooth Communication System | 13
MENU