Wiper Blade Rubber Replacement - Mitsubishi MOTORS ATTRAGE Manual

CAUTION
 When installing or removing a tyre chain,
take care that hands and other parts of your
body are not injured by the sharp edges of
the vehicle body.
 Install the chains only on the front tyres and
tighten them as tightly as possible with the
ends securely fastened.
NOTE
 The laws and regulations concerning the use
of tyre chains vary. Always follow local laws
and regulations.
In most countries, it is prohibited by the law
to use of tyre chains on roads without snow.
Wiper blade rubber replace-
ment
E01008201465
Windscreen wiper blades
1. Lift the wiper arm off the windscreen.
2. Pull the wiper blade until its stopper (A)
disengages from the hook (B). Then, pull
the wiper blade further to remove it.
NOTE
 Do not allow the wiper arm to fall onto the
windscreen; it could damage the glass.

Wiper blade rubber replacement

3. Attach the retainers (C) to a new wiper
blade.
Refer to the illustration to ensure that the
retainers are correctly aligned as you
attach them.
4. Insert the wiper blade into the arm, start-
ing with the opposite end of the blade
from the stopper. Make sure the hook (B)
is fitted correctly in the grooves in the
blade.
NOTE
 If retainers are not supplied with the new
wiper blade, use the retainers from the old
blade.
Maintenance
10
10-13