HAMPTON BAY 84075 Use And Care Manual

PACKAGE CONTENTS
A
PLANNING FOR A SUCCESSFUL ASSEMBLY
Read all instructions before assembly and installation.
Inspect each part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of purchase.
CHOOSING THE RIGHT LOCATION
Install your solar light in a location with full, direct sunlight. Do not install in shad-
ed areas as these areas will not allow the batteries to fully charge and will reduce
the nighttime operating hours for your light. Ensure that the installation location
is away from other nighttime light sources such as street or porch lamps. These
light sources may prevent your solar light from automatically turning on.
HOW SOLAR WORKS
The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries. At night, the
solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location, daily weather conditions, and
season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.
Assembly and Installation
1
Preparing for installation
□
FOR FIRST TIME USE: Remove the pull tab between the top cover (A)
and the housing (D).
□
Firmly slide the post (E) into the solar housing (D).
Use and Care Guide
Solar LED Path Light
B C
A
D
D
E
D
Part
A
AA 900 mAh, Ni-Mh rechargeable battery
B
C
D
E
F
2
Installing the solar path light in the ground
NOTE: Do not use a hammer. If the ground is hard, use water to soften or a
trowel to loosen the soil.
□
Attach the post (E) to the stake (F).
□
Push the assembly firmly into the ground.
1
Please contact
Item #1002 654 611
Model #84075
E
Description
Top cover
(pre-installed)
Battery cover
Housing
Post
Stake
E
F
HAMPTONBAY.COM
for further assistance.
1-855-HD-HAMPTON
F
Quantity
20
20
20
20
20
20