Advertisement
Quick Links
• READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF BED RAIL.
• KEEP INSTRUCTIONS FOR FUTURE USE.
www.regalo-baby.com
Regalo International, LLC.
3200 Corporate Center Drive, Suite 100 / Burnsville, MN 55306, USA
866.272.5274 (U.S. only) or 952.435.1080
Made in China
OWNER'S MANUAL MODELS:
HideAway
Bed Rail
4010 HD, 5010 HD,
5030 HD,
Advertisement
Related Manuals for Regalo HideAway 4010 HD
Summary of Contents for Regalo HideAway 4010 HD
- Page 1 • READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF BED RAIL. • KEEP INSTRUCTIONS FOR FUTURE USE. www.regalo-baby.com Regalo International, LLC. 3200 Corporate Center Drive, Suite 100 / Burnsville, MN 55306, USA 866.272.5274 (U.S. only) or 952.435.1080 Made in China...
-
Page 2: Before Using Product
• Do not use two separate bed rails on one bed. The bed rails will not function properly and could be a safety hazard. Should you need coverage on both sides of the bed, purchase the Regalo Double Sided Bed Rail. WARNING •... -
Page 3: Before Assembly
Before Assembly PLEASE CHECK TO MAKE SURE YOU HAVE THE FOLLOWING PARTS: Mesh Wall Right Upper Support Bar Left Upper Support Bar Right Bottom Support Bar Left Bottom Support Bar Right Guide Arm Assembly Left Guide Arm Assembly English... - Page 4 Assembling Your Bed Rail STEP 1 Insert the left upper support bar into the left bottom support bar. Make sure the spring pin fits securely into the opposing hole so that the two pieces cannot pull apart. Repeat on the right side of the bed rail. STEP 2 With the left and right sides of the bed rail assembled, connect the two sides.
- Page 5 STEP 3 To install the mesh wall on the bed rail, slide it over the frame until it reaches the other end, zip it shut, then attach the velcro strap over the zipper to complete the installation. Pull straps to tighten Latch Open NOTE: If the zipper does not close securely, make the necessary adjustments to ensure proper closure.
- Page 6 STEP 4 Lay the frame assembly flat, and align the left guide pins with the guide track on the left guide arm assembly. Repeat this on the right side. GUIDE PIN GUIDE TRACK English...
- Page 7 STEP 5 Slide the frame assembly along the guide track on each side. STEP 6 When the frame assembly is at the end of the guide tracks, pivot the frame assembly into an upright position. NOTE: When you swing the frame assembly into the upright position, it should automatically lock into place.
- Page 8 Mounting Your Bed Rail to the Bed NOTE: The following step may require the help of an additional person. STEP 1 Remove the mattress from the bed and place the bed rail on top of the box spring that supports the mattress. The straps and anchors should be extended opposite the bed rail and mounted to the other side of the box spring.
- Page 9 STEP 2 Once the bed rail is properly placed, check to make sure the guide arm assemblies are parallel to one another. Then, place the mattress on top of the assembly. NOTE: The bed rail mesh wall must fit firmly against the side of the mattress. This requires you to properly tighten the anchoring straps, which can be difficult.
- Page 10 NOTE: When using this bed rail on a foam mattress, with little or no internal structure, make sure the straps are not over tightened. If the straps are too tight the mattress will likely fold or buckle in the middle. This will limit the bed rail's ability to provide your child with the highest level of safety.
- Page 11 Operating the HideAway Feature STEP 1 Locate the spring locking knobs on each of the hinges. Pull them up towards the top of the bed rail, releasing the frame structure from it’s upright position. This will allow the upper part of the bed rail to move freely. SPRING LOCKING KNOBS...
- Page 12 STEP 2 With both sides unlocked, pivot the bed rail mesh wall down, so that it is parallel with the top surface of the mattress. NOTE: Be sure to continue to hold the upper part of the bed rail so that it does not drop down on its own.
-
Page 13: Care And Maintenance
Regalo International, LLC, will replace or repair it at Regalo’s option. PROOF OF PURCHASE REQUIRED. - Page 14 • Ne pas utiliser deux barrières de lit séparées sur un lit. Les barrières de lit ne fonctionneront pas correctement et pourraient être dangereuses. Dans l'éventualité où il serait nécessaire de couvrir les deux côtés du lit, se procurer la barrière de lit double de Regalo. MISE EN GARDE • DANGER DE SUFFOCATION ET D'ÉTRANGLEMENT •...
- Page 15 Regalo International, LLC. 3200 Corporate Center Drive, Suite 100 Burnsville, MN 55306, USA 866.272.5274 (U.S. only) or 952.435.1080 20191105ET...
Need help?
Do you have a question about the HideAway 4010 HD and is the answer not in the manual?
Questions and answers