Operating The Remote Control - SMSL Sanskrit 10th User Manual

Remote control
Install 2 x AAA batteries as instructions.
When using the remote control, point it toward the remote con-trol signal receiver on
the main unit from a distance of 5 m (16 ft) or less. Do not place obstructions between
the main unit and the remote control.
The remote control might not work if the remote control signal receiver on the unit is
exposed to direct sunlight or bright light. If this occurs, try moving the unit.
Beware that use of this remote control could cause the unin-tentional operation of
other devices that can be controlled by infra.

Operating the remote control

P ower ON/OF
Mute
Vvolume up
PCM filter switch
no functions
Vvolume down
Display ON/OFF
Input switch
Switch to control
Do not press for this unit
Approximately 8 m(26 ft)
Sanskrit 10th
1. This remote controller use 2 x R03/AAA batteries.
2. When you first operate Sanskrit 10th, press the C key first.
Note
Sanskrit 10th