Direct Connection To The Server; Connection To A Single Server; Figure 3.2 Direct Fc-Al Connection, A Single Server Connection - Fujitsu ETERNUS LT260 User Manual

Chapter 3 Connections

3.2 Direct Connection to the Server

3.2 Direct Connection to the Server
This section provides an example of direct connection between the LT260 and the server.
The methods and settings for the backup operation depend on which backup software is used. For details,
contact the support department of the backup software vendor.
3.2.1

Connection to a Single Server

This section provides an example of zoning when the LT260 is connected to a single server.

Figure 3.2 Direct FC-AL connection, a single server connection

Server
Backup software
LT260
FC cable
Using Serial Attached SCSI (SAS) in combination with double ended cables, you can connect two drives to one
HBA. If there is a double ported HBA available four drives per HBA are possible.
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Site Planning-
Controller
36
Copyright 2018 FUJITSU LIMITED P3AM-8782-06ENZ0