4. INSTALLMEN AND SATRT UP
4.1. Location of the machine
The forging machine NARGESA PC16 will be placed on a flat surface so it can be levelled. It can be clam-
ped to the ground if desired through the holes made on its base for that purpose.
4.2. Working site
In order to use the forging machine NARGESA PC16 it is essential to have enough space to work at the
front of it (as it is shown in the drawing) and also to have access to its side part to carry out maintenance
on the machine.
INSTRUCTIONS BOOK FOR HOT WROUGHT IRON MACHINE PC16
10