Table of Contents
Advertisement
6.2 ECO Setting
This mode allows you to control the sound level from your baby's room to automatically activate the
sound and video transmission on your Parent Unit. When using the ECO function, the sound and video
transmission will stop (standby mode) if the Baby Unit does not register any sound within 30 seconds.
While in standby mode, the LCD screen turns off. Once the Baby Unit registers a sound, louder than the
set sensitivity level, it will automatically start transmitting the signal (sound and video) to the Parent
Unit and the LCD screen will turn on.
Note: ECO default setting is OFF in the supplied product.
To change the ECO level, please follow the following instructions:
• Press the MENU/EXIT button (8) and the menu will be displayed on the Parent Unit.
• Press the LEFT button (11) or RIGHT button (12) until the ECO icon is highlighted in red and then
press OK (6) to confirm.
• Press the LEFT button (11) or RIGHT button (12) to select the desired level (HIGH, MID, LOW, OFF).
• Press OK (6) to confirm.
• Press the MENU/Exit button (8) to Exit.
Note: ECO-LOW Low sensitivity level - higher sound level is required to reactivate the transmission
ECO-MID Medium sensitivity level - medium sound level is required to reactivate the transmission
ECO-HIGH High sensitivity level - low sound level is required to reactivate the transmission
OFF Constant transmission – no standby mode.
Note: When ECO function is on, a ECO indicator will be displayed on top of the LCD screen.
Note: To view a video signal on your parent unit when ECO function is on,
briefly press the power key.
6.3 Temperature Unit Setting
• Press the MENU/EXIT button (8) and the menu screen will be displayed on the Parent Unit.
• Press the LEFT button (11) or RIGHT button (12) until the Temperature icon is highlighted in red and
then press OK (6) to confirm.
• Press the LEFT button (11) or RIGHT button (12) to select between C˚ or F˚ .
• Press OK (6) to confirm.
• Press the MENU/EXIT button (8) to Exit.
Note 1: Temperature indicator will be displayed on top of the LCD screen.
Note 2: The temperature default setting is F˚ (Fahrenheit ).
11
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the V24R US and is the answer not in the manual?
Questions and answers
I just got the baby sense V24R it seems that the volume on the parent unit is not very loud I need to hold it to my ear to really hear on the loudest setting. I **** grandma just got it for babysitting
The volume on the BabySense V24R parent unit may be low even on the loudest setting due to background noise levels. In a quiet environment, the volume should be set to level 3 or below, while in a loud environment, it should be set to the maximum level. Additionally, if the "Talk To Baby" function is in use, sound from the baby unit will not be heard until the talk button is released.
This answer is automatically generated