Download Print this page
Azbil ACTIVAL VY51 K Series Specifications & Instructions

Azbil ACTIVAL VY51 K Series Specifications & Instructions

Motorized two-way valve with flanged-end connection, spring return type actuator (jis 10k-fc200, -scs13a)

Advertisement

Quick Links

Motorized Two-Way Valve with Flanged-End Connection
(Spring Return Type Actuator)
„ Overview
ACTIVAL™ Models VY51_ _K and VY51_ _H are
series of motorized two-way valves, DN15 (1/2") to
DN80 (3") , with flanged-end connection. Valve and
actuator are integrated in a single unit.
The valve body rating corresponds to JIS 10K.
The actuator has a reversible synchronous motor,
which operates at a low voltage of 24 V AC.
The actuator fully closes the valve in case of power
failure, so it is suitable for failsafe applications.
There are following four control signals available.
• Nominal 135 Ω feedback potentiometer (built-in)
Provides proportional control in combination with a
DDC controller. (e.g., Infi lex GC Model WY5111)
• Nominal resistance 135 Ω input
Provides proportional control in combination with
a proportionally controlled electric controller. (e.g.,
Neostat Model TY900_Z) , insertion type Thermostat
Model TY9800)
• 4-20 mA DC input
Provides proportional control in combination with
a DDC controller. (e.g., Infi lex GC Model WY5111,
Model R35/R36)
• 2-10 V DC input
Provides proportional control in combination with a
DDC controller. (e.g., Infi lex AC Model WY5117)
„ Features
• Compact and lightweight
• Valve and actuator integrated in a single unit
• Conforms to IP54 (dust-proof, splash-proof)
Can be installed in AHU.
Note: Waterproof connectors are required to assure IP54.
• A variety of control input signals available
• Durable actuator with low power consumption
• 2–10 V DC output with feedback signal
Only for the 4-20 mA DC input type (Model VY513_)
and the 2–10 V DC input type (Model VY514_) .
ACTIVAL™
(JIS 10K-FC200, -SCS13A)
Specifications/Instructions
Notes:
- AHU: Air Handling Unit
- DDC: Direct Digital Control
- JIS: Japanese Industrial Standards.
• Spring return actuator
Actuator automatically closes the valve in 0 %
position in case of power failure.
• Equal percentage fl ow characteristic
• Valve for water/steam control applicable to
high differential pressure, large Cv value, high
rangeability, and low leakage.
IMPORTANT
• If you want to use this product combined with a third
party's controller, please contact Azbil corporation.
© 2004-2017 Azbil Corporation All Rights Reserved.
1
AB-6526

Advertisement

loading
Need help?

Need help?

Do you have a question about the ACTIVAL VY51 K Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Azbil ACTIVAL VY51 K Series

  • Page 1 • If you want to use this product combined with a third Only for the 4-20 mA DC input type (Model VY513_) party's controller, please contact Azbil corporation. and the 2–10 V DC input type (Model VY514_) . © 2004-2017 Azbil Corporation All Rights Reserved.
  • Page 2: Safety Precautions

    Azbil Corporation.  with 2 or more people. Azbil Corporation bears no responsibility for Careless lifting or accidental dropping of the product may result in injury or product any result, or lack of result, deriving from the damage.
  • Page 3 AB-6526  CAUTION  CAUTION When installing this product, hold it in the All wiring must comply with applicable codes  proper position and securely fasten it to the and ordinances.  pipes. Otherwise there is a danger of fire. Excessive tightening or improper installation Use crimp terminals with insulation for position may damage the valve.
  • Page 4 Either the auxiliary switch or the auxiliary potentiometer can be added. Cannot coexist. For details, refer to the user's manual attached to the product. If the applied current exceeds 100 mA, please contact Azbil Corporation. It is for replacing Model V5063 or Model V5064 with Model VY51_ _.
  • Page 5 AB-6526 „ Specifications z Valve and actuator Item Specification Operating conditions Rated operating conditions Ambient -20–50 °C (when temperature of fluid is 0–150 °C) temperature -20–40 °C (when temperature of fluid is 150–175 °C) Ambient 5–95 % RH humidity Vibration 4.9 m/s (10–150 Hz) Transportation/storage...
  • Page 6 AB-6526 z Valve Item Specification Two-way valve, flanged-end connection Type of valve Rated pressure JIS 10K (max. operating pressure 1.0 MPa) Valve size, Closed-off rating Chilled/hot water, Model Number Valve size Closed-off rating high temperature Steam* water VY51_ _K00 DN15 (1/2”) 1.0 MPa DN15 (1/2”) DN15 (1/2”)
  • Page 7 AB-6526 z Actuator Item Specification Power supply 24 V AC ± 15 %, 50/60 Hz Power consumption 13 VA Nominal 135 Ω feedback potentiometer Nominal 135 Ω resistance Input 15 VA 4–20 mA DC input 2–10 V DC input Actuator Standard or high differential Spring return type pressure types...
  • Page 8 AB-6526 „ Dimensions z Model VY51_5_00_ _ (JIS 10K-FC200) 100 min *1, *2 300 min N×φh φC φD Clearance for maintenance. For setting the auxiliary switch, make sure to allow a clearance of 300 mm or more. Figuar 1 Dimensions for Model VY51_5_00_ _ (JIS 10K-FC200) (mm) Table 1 Dimension table for Model VY51_5K00_ _ (JIS 10K-FC200) (mm) Model number Valve size...
  • Page 9 AB-6526 z Model VY51_6_00_ _ (JIS 10K-SCS13A) 100 min *1、 *2 300 min N×φh φg φC φD Clearance for maintenance. For setting the auxiliary switch, make sure to allow a clearance of 300 mm or more. Figuar 2 Dimensions for Model VY51_6_00_ _ (JIS 10K-SCS13A) (mm) Table 3 Dimension table for Model VY51_6K00_ _ (JIS 10K-SCS13A) (mm) Model number Valve size...
  • Page 10 AB-6526 „ Parts Identification Top cover Top cover Actuator Terminal cover Knockout hole Pointer Pointer Spring unit Yoke Gland packing Stem Valve body Seat ring plug Figuar 3 Parts identification...
  • Page 11: Mounting Position

    AB-6526 „ Installation • Install the product so as not to remain drainage in  WARNING the piping. When handling or transporting any heavy If there is a risk of drainage, provide a trap. product (more than 18 kg), carefully move If drainage remains in the piping, water hammer the product with a handtruck or the like, or (or steam hammer) may occur, and valves or...
  • Page 12: Heat Insulation

    AB-6526 z Piping z Heat insulation • Apply heat insulation in the area illustrated by  CAUTION in Fig. 6. When installing this product, hold it in the • If the heat insulation material is placed above the proper position and securely fasten it to the ...
  • Page 13 AB-6526 „ Wiring z Control signals type  CAUTION The type of control signals is printed on the actuator Provide a circuit protector (e.g., a fuse or label and the wiring diagram label as shown below. circuit breaker) for the power source. ...
  • Page 14 AB-6526 z Nominal 135 Ω resistance input (4) Mount the terminal cover and attach it with the setscrews. (Model VY512_K00_ _, Model VY512_H00_ _)  CAUTION After wiring, be sure to reattach the cover.  Failure to do so may result in electric shock. Open Open ~...
  • Page 15 AB-6526 „ Wiring Examples z Nominal 135 Ω feedback potentiometer z 4–20 mA DC input (Model VY511_) (Model VY513_) Power transformer (Model AT72-J1) CLOSE(0) ~ ① 100/200 V AC ~ OPEN(100) ⊥ ② AC24V ③ CLOSE *2 + ④ ⑬ +...
  • Page 16 AB-6526 „ Advanced Wiring Examples z Nominal 135 Ω resistance Input (Model VY512_) Summer-winter changeover Minimum opening setting Power transformer Power transformer (Model AT72-J1) (Mode AT72-J1) ~ ~ 100/200 V AC ~ 100/200 V AC ~ ⊥ ⊥ CLOSE CLOSE ×...
  • Page 17 AB-6526 z 4–20 mA DC input (Model VY513_) Precautions Power is shared • Power transformer is shared 1 ~ If a power transformer is shared by two products, ⊥ connect the terminal  of each actuator to the transformer with the same polarity. Connect the ⑬...
  • Page 18 AB-6526 z 2–10 V DC input (Model VY514_) Precautions Power is shared • Power transformer is shared 1 ~ *3 If a power transformer is shared by two products, ⊥ connect the terminal  of each actuator to the Model WY5117 transformer with the same polarity.
  • Page 19 Table 6, take appropriate measures according to the symptom. Although the measures are taken, if the trouble cannot be recovered, please contact Azbil Corporation. Table 5 Inspection items and inspection method...
  • Page 20 Electronic Equipment Directive (RoHSD) . EMCD: EN 61000-6-2 EN 55011 Class A, Group 1 RoHSD: EN 50581 * ACTIVAL is a trademark of Azbil Corporation. * Infilex is a trademark of Azbil Corporation. Building Systems Company 1-12-2 Kawana, Fujisawa, Kanagawa 251-8522 JAPAN http://www.azbil.com/...