Power blowers laminar electric - le special operations variable speed (sp vs) (20 pages)
Summary of Contents for Tempest BB-16
Page 2
This booklet has been prepared to help you use the BB-16 blower. The instructions for use and safety guidelines must be followed in order to prevent any accident. Any disassembly or repair must be performed by TEMPEST or an approved dealer.
1 INTRODUCTION BB-16 is a battery-powered self-contained fan. It is powered by batteries or AC power. Easy to install; easily stored in the boot of a response vehicle and can be carried by one person. There are 1 version for each power supply:...
-20°C (-4°F) to +55°C (131°F) on battery power (whilst respecting storage temperatures). § The BB-16 equipped with its extraction duct (option) is designed for gas temperatures up to 60 °C (140° Note: Ensure that each person responsible for the device/using this device has read the user instructions and...
4 GENERAL FEATURES v Dimensions in storage position v Features BB-16 Weight 23.5 Kg +/-0.5kg (51.81 +/- ib 1.1 ib) With battery, 19.4 Kg +/-0.5kg (42.8 ib +/-1.1 ib) Without battery Battery at full capacity 50 minutes Battery 12.5 Ah...
5 PRESENTATION BB-16 is equipped with a lateral control console and benefits from Easy Pow ‘Air technology and a NEO grille. Ø Description : Rear grille Transport handle Propeller Motor Casing and NEO front grille Lithium battery Rotation with adjustable handle...
6 COMMISSIONING INSTRUCTIONS - On delivery, visually inspect BB-16 and its accessories to ensure there was no damage during transport. Do not try and use BB-16 if you notice any damage, contact TEMPEST immediately. A fuse is provided for surge protection (110V or 230V).
Page 9
It can also be used for suction of cold smoke (<60°C) (140°F). Due to their design, BB-16 fans can be used at a distance from 0.5 to 6m (1.6 to 19.69ft) from an opening. TEMPEST recommends a minimum smoke removal opening the same size as the window.
(rated +/- 10%) before connecting the device and when charging. The battery can be charged either inside the BB-16 or using the external fast charger (optional). ð Charging in the device : Place the battery pack in its compartment inside the BB-16.
Page 11
2/ Before starting the fan : ð Position BB-16 in a stable position and ensure there is no obstacle between the fan and ventilation opening. ð Adjust the angle between +65° and -90° using the adjustable adjusting handle. Adjustable handle 3/ Starting the fan : ð...
Never remove the fuses when the device is connected or operating. Leader will not be held liable for any damage due to inappropriate, incorrect or abnormal handling. Ø A glass fuse is provided for surge protection. To change the fuse, disconnect the BB-16, unscrew the fuse holder cap.
Page 13
§ Do not remove the battery when the BB-16 is in mains or battery operation. Note: If the battery is discharged and the BB-16 is connected to the mains or in operation. Then stop the fan, disconnect the mains plug and disconnect the battery if necessary.
Page 14
4/ Battery Treatment Discarding batteries directly in the garbage greatly harms the environment. By replacing your batteries from TEMPEST or an authorised distributor, you can be certain they will be recycled according to environmental rules. Do not throw batteries away just anywhere; limit any risk of pollution and avoid contaminating nature with the traces of heavy metals still contained in certain types of batteries.
375+/-1 5/ Features § Batterie 585-005 Reference : Model : 3300001 Voltage : Power : 600Wh Weight : 3.800Kg (8.38ib) +/-0,1Kg (0.22ib) 146+/-1 82+/-1 § Charger I63.12.301(EU) / 585-035(US) Reference : Model : YZP-450 INPUT : 100-240Vac 3.5a 50/60Hz 54.6v, OUTPUT : 5.0A Weight :...
Page 16
LEDs indicate the selected speed setpoint; you must wait a few seconds to reach the desire speed. Alarms and warnings tables: LED Flashing Display Meaning BB-16 status Solution Does not work on battery or Driver fault Restart the fan mains power...
Meaning Display State of BB-16 Solution Temperature too low during The fan does not charge but Place the fan at room temperature (20°C +/-5) charge (Below 0°C) (Below works on mains power (68°F +/-5) 32°F) The fan does not charge but...
• If battery is low, use AC power. The fan stopped operating on • See LED status description (P17/18). battery Nota : Over time and the charge cycles, the battery will lose its autonomy. 13 SPARE PARTS To identify your BB-16 parts, please contact us. response@tempest.us.com...
After reviewing the equipment: - If the defect is attributable to TEMPEST, it will repair it and assume the costs (excluding shipping and handling fees). - If the defect is not attributable to TEMPEST, see the procedures explained below in the Out-of- warranty defect paragraph.
Need help?
Do you have a question about the BB-16 and is the answer not in the manual?
Questions and answers