Removal And Installation; Removal And Installation, Windscreen Wiper System - DAF LF45 Series Manual

1
LF45/55 series

4. REMOVAL AND INSTALLATION

4.1 REMOVAL AND INSTALLATION, WINDSCREEN WIPER SYSTEM

Notes:
Before replacing the wiper linkage, the following
points must be observed.
If the bearings of the wiper linkage are worn,
replace them as well as the linkage.
Use the correct tools when removing old linkage
in order to avoid damaging the seals.
Use FINA Ceran-grease for new linkage.
When fitting new linkage, never hit the sealing
covers of the linkage with a hammer or other
hard object. These covers are only 1 mm thick
and might suffer damage in this way.
If the motor shaft shows evidence of axial play,
replace the motor. This play will cause excessive
wear to the wiper linkage.
Removing the windscreen wiper system
1. Remove the attachment nuts (1) from the
windscreen wiper arms and remove the
windscreen wiper arms (2) using a pulley
puller (trade tool).
0210
2 1
https://www.truck-manuals.net/
EXTERNAL CAB COMPONENTS
Removal and installation
2
K1 00 985
1
4-1
4