SPIERINGS AT4 Manual page 48

1. Make sure the engine is not running.
2. Unscrew the cap (1) from the filter housing
(2) and take the cap together with the filter
element (3) from the filter housing
(see Picture 4-13).
3. Remove the filter element from the cap.
4. Check the sealing rubber in the cap and
renew if necessary.
5. Place a new filter element in the cap.
6. Install the cap together with the filter element
on the filter housing.
7. Do not screw on the cap too tight.
8. Start the engine and check for possible leaks.
9. Reinstall the centre plate on the engine
cowling
AT4-EN-050819.doc
MANUAL SPIERINGS TRUCK AT4
Picture 4-13
4-10