Cleaning And Care; Lime Removing Feature (Self-Clean); Replacing The Lime Collecting Cartridge - Beko SGA 6126 R User Manual

3 Cleaning and care

3.1 Cleaning
WARNING
• Do not soak the steam station (2)
in water or other liquids. Never put
vinegar, descaling agent, laundry
starch, perfume or other auxiliary
A
products that help ironing into the
appliance.
• Do not use gasoline, solvent and
abrasive cleaning agents or hard
brush to clean the appliance.
• Do not use abrasive cleaning
agents to clean the soleplate (7).
B
WARNING: Do not wash your appli-
ance under running water or do not
soak it in water or other liquids.
3.2 Replacing the lime collecting
cartridge
WARNING
• Do not use any descaling agents!
They may damage the appliance.
• Do not purchase cartridge from
places other than the dealers and
service centers. If you do this, the
cartridge will not fit into the car-
A
tridge slot and will not operate.
This causes a breakdown in your
appliance. Faults arising from
using wrong cartridge are not
covered under warranty.
• If lime collecting cartridge is not
installed or abnormally installed,
all of the lights at screen will flash
on and off to hint about abnormal
installation of the cartridge.
C
The cartridge must be replaced after
consuming about 30 liters of water.
Steam Station / User Manual
3.3 Lime removing feature
(Self-Clean)
• After consuming about 15 liters
of water, "Self-clean" icon lights
lit continuously on as shown in
the picture indicating the need for
self-cleaning process.
C
• These icons blink during self-
clean process.
• During self-cleaning process, user
cannot exit until the self-clean is
completed.
• If user skips self-cleaning pro-
cess or plugs the iron off, the
appliance will remind this need
of self-cleaning operation with
related icon lights and buzzer
sounds simultaneously for three
times at the beginning of every
ironing session.
• When the lime removing (self-
clean) is over, the appliance au-
tomatically returns to the smart
- eco mode.
15 / EN