Zanussi ZDS 2010 User Manual
  1. Manuals
  2. Brands
  3. Zanussi Manuals
  4. Dishwasher
  5. ZDS 2010
  6. User manual
Zanussi ZDS 2010 User Manual

Zanussi ZDS 2010 User Manual

Zanussi dishwasher user manual
Hide thumbs Also See for ZDS 2010:
Table of Contents

Advertisement

Quick Links

User manual
2
EN
Dishwasher
ZDS 2010

Advertisement

Table of Contents
loading

Related Manuals for Zanussi ZDS 2010

Summary of Contents for Zanussi ZDS 2010

  • Page 1 User manual Dishwasher ZDS 2010...

  • Page 2: Table Of Contents

    Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Use of the appliance _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Setting the water softener _ _ _ _ _ _ _ _ _ _ _ _ _ 5...

  • Page 3: Control Panel

    • Do not change the specifications or modify this prod- uct. Risk of injury and damage to the appliance. • Do not use the appliance: – if the mains cable or water hoses are damaged, – if the control panel, worktop or plinth area are dam- aged, that you can get access to the inner side of the appliance.

  • Page 4: Washing Programmes

    Programme knob and on/off indicator light • To set a washing programme, turn the programme knob clockwise or anticlockwise. The programme marker on the programme knob must agree with one of the washing programmes on the control panel. – The on/off indicator light comes on (position ON). •...

  • Page 5: Use Of The Appliance

    Programme Duration (in minutes) Quick 65° A 30' Economy 50° 120 - 130 Prewash The pressure and temperature of the water, the var- iations of power supply and the quantity of dishes can change these values. Use of the appliance Refer to the following instructions for each step of pro- cedure: 1.

  • Page 6: Use Of Dishwasher Salt

    Water hardness °dH °TH 51 - 70 91 - 125 43 - 50 76 - 90 37 - 42 65 - 75 29 - 36 51 - 64 23 - 28 40 - 50 19 - 22 33 - 39 15 - 18 26 - 32 11 - 14...

  • Page 7: Use Of Rinse Aid

    Fill the salt container with 1 litre of water (only the first operation). Use of rinse aid Caution! Only use branded rinse aid for dishwashers. Do these steps to fill the rinse aid dispenser: It is normal that water overflows from the salt con- tainer when you fill it with salt.

  • Page 8: Loading Cutlery And Dishes

    Caution! Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent, liquid detergent). There is a risk of damage to the appliance. Loading cutlery and dishes Helpful hints and tips Caution! Only use the appliance for household utensils that are applicable for dishwashers.

  • Page 9: Use Of Detergent

    Arrange the items to let For longer items, fold the water touch all surfaces. cup racks up. Adjustment of the height of the upper basket If you put large plates in the lower basket, first move the upper basket to a upper position. Warning! Adjust the height before you load the upper basket.

  • Page 10: Setting And Starting A Washing Programme

    Different brands of detergent dissolve in different times. Some detergent tablets do not have the best cleaning results during short washing programmes. Use long washing programmes when you use detergent tab- lets to fully remove the detergent. Use of combi detergent tablets These tablets contain agents such as detergent, rinse aid and dishwasher salt.

  • Page 11: Care And Cleaning

    Do not open the door during the countdown to pre- vent interruption of the countdown. When you close the door again, the countdown continues from the point of interruption. Cancelling a delay start: 1. Press and hold the start/cancel button until, the start/ cancel indicator light and delay start indicator light go off.

  • Page 12: What To Do If

    External cleaning Clean the external surfaces of the appliance and control panel with a damp soft cloth. Only use neutral detergents. Do not use abrasive products, scouring pads or solvents (acetone, trichloroethylene etc...). Frost precautions Caution! Do not install the appliance where the temperature is below 0 °C.

  • Page 13: Technical Data

    Fault code and malfunction The programme does not start After the check, switch on the appliance. The programme continues from the point of interruption. If the malfunction shows again, contact your Service Force Centre. For other fault codes, not described in the chart, contact your Service Force Centre.

  • Page 14: Environment Concerns

    Electrical connection - Voltage - Overall power - Fuse Water supply pressure Capacity Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment.

  • Page 15: Water Connection

    Water connection Water inlet hose Connected the appliance to a hot (max. 60°) or cold water supply. If the hot water comes from alternative sources of energy that are more environmentally friendly (e.g. solar or pho- tovoltaic panels and aeolian), use a hot water supply to decrease energy consumption.

  • Page 16: Electrical Connection

    Electrical connection Warning! The manufacturer is not responsible if you do not follow these safety precautions. Ground the appliance according to safety precautions. Make sure that the rated voltage and type of power on the rating plate agree with the voltage and the power of the local power supply.
  • Page 20 To buy accessories, consumables and spare parts at our online shop please visit: www.zanussi.co.uk www.zanussi.com...

Table of Contents