Installation Instructions
DC3210 Series
A11 or A12 Heavy Duty Spring Stop Parallel Arm
Important
•
An improperly installed or incorrectly adjusted door closer may cause property damage or personal injury; and will void
product warranty.
•
To avoid personal injury, DO NOT DISASSEMBLE THIS DOOR CLOSER BODY.
•
Door closers must be securely fastened to a properly reinforced door and frame with fasteners provided.
•
Door closers with a HOLD OPEN ARM are not permitted to be installed in fire door assemblies.
•
Door and frame must be specifically templated for 85°, 90°, 95°, 100°, 105° orb 110° door swing.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
80-9330-3003-152 04/18
Need help?
Do you have a question about the Corbin Russwin DC3210 Series and is the answer not in the manual?
Questions and answers