Advertisement
know your Kenwood deep fryer
safety
G
Never plug in the fryer before filling the bowl with oil.
G
Keep children away during use and after - fat stays hot
for a long time.
G
Never let the cord touch hot surfaces or hang down
over the worktop edge - a child could grab it and pull
the fryer down. Place excess cord in cord storage area
at the back of the fryer.
G
Never touch the bowl, pour away oil or move your fryer
while the oil's hot.
G
Never put the electrics unit in water. Remove it before
washing the rest of your fryer.
G
After cleaning, ensure the bowl and its electric pins are
dry before use.
G
Never leave your fryer on unattended.
G
This fryer is not intended for use by young children or
infirm persons without supervision.
G
Young children should be supervised to ensure that
they do not play with this appliance.
G
Take care when removing the electrics unit - the
temperature probes may be hot.
G
Do not use if there is any damage to the fryer, cord or
plug. Get it checked or repaired: see 'service'.
G
Only use the electrics unit supplied.
G
Watch out for steam during cooking and when you
open the lid.
G
Never put your fryer near or on cooker hot plates.
G
This fryer is for domestic use only.
G
Always unplug the fryer after use.
before plugging in
G
Make sure your electricity supply is the same as the
one shown on the underside of the electrics unit.
important - UK only
G
The wires in the cord are coloured as follows:
Green & Yellow = Earth, Blue = Neutral, Brown = Live.
G
This machine complies with European Economic
Community Directive 89/336/EEC.
before using for the first time
1 Remove all packaging.
2 Dismantle: see 'to dismantle, assemble and use your
fryer'.
3 Wash the parts: see 'cleaning'.
4 Use the cord storage at the back of the fryer to store
any excess cord
.
know your Kenwood fryer
removable lid with permanent mesh filter
viewing window
lid seal
condensation trap
rise and fall basket
basket handle
handle stem
pouring spouts
fixed bowl
lid release
body
bowl electric pins
carrying handles
temperature probes
electrics unit
temperature light
temperature control
cord storage
to dismantle, assemble and use
your fryer
to dismantle
1 Push the lid release
the lid off.
2 Lift up the handle and remove the basket.
3 Pull out the electrics unit.
to assemble and use
1 Insert the electric unit
2 Pour in the oil. The level must be between the 'MAX'
and 'MIN' marks.
3 Insert the basket, then close the lid.
4 Plug in and select the required temperature
5 The light goes out when the oil reaches the right
temperature to start frying. Fill the basket and lower
into the oil
A
. Don't exceed the maximum food
quantities stated. The light will come on and off as
the fryer maintains the temperature.
6 When ready, raise the basket until the handle stem
rests securely
B
. Allow the food to drain before
opening the lid.
G
To re-use oil, allow to cool then pour the oil through fine
muslin or absorbent paper.
G
Always unplug the fryer after use.
2
down to open the lid. Then lift
.
.
Advertisement
