Download
Share
Print this page
  1. Manuals
  2. Brands
  3. GICO Manuals
  4. Griddle
  5. 700 Series
  6. Instruction booklet

GICO 700 Series Instruction Booklet

Gas griddles
Hide thumbs

Advertisement

Quick Links

Download this manual
3
INSTRUCTIONS BOOKLET FOR
GAS GRIDDLES
GB R0/99 3975003224
GICO SPA - 31028 Vazzola - TV - ITALY - Via IV Novembre, 81 - Tel. + 39 0438 4444 - Fax + 39 0438 740386 - www.gico.it - info@gico.it
The manufacturer reserves the right to bring without notice any modification to improve the product.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 700 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for GICO 700 Series

  • Page 1 GB R0/99 3975003224 GICO SPA - 31028 Vazzola - TV - ITALY - Via IV Novembre, 81 - Tel. + 39 0438 4444 - Fax + 39 0438 740386 - www.gico.it - info@gico.it The manufacturer reserves the right to bring without notice any modification to improve the product.
  • Page 2 OF THE EUROPEAN COMMUNITY RULES undersigned VALERIA ONGARO, managing director GICO S.p.A., Via IV Novembre, 81- 31028 Vazzola (TV) - Italy Declars that the equipment TARGHETTA Is in compliance to the standards of the following european directives and successive ammendments:...
  • Page 3 READING OF THE CERTIFICATION CODE The Fry-top modules certified are: FT01 1/2 module Fry-Top Qn= 6.10 kW Serie 700 FT02 1/1 module Fry-Top Qn= 12.20 kW Serie 700 FT03 1/2 module Fry-Top Qn= 7.30 kW Serie 900 FT04 1/1 module Fry-Top Qn= 14,60 kW Serie 900 FT05...
  • Page 4 INDEX FITTER’S INSTRUCTIONS........................6 1.1. PRECAUTIONS............................6 1.2. Positioning ..............................6 1.2.1. Site ................................6 1.2.2. Laws, technical regulations and standards ..................... 6 1.3. Installation..............................7 1.3.1. Installation works ............................7 1.3.1.1. Gas connections............................7 1.3.1.2. Unipotential connection..........................7 1.3.1.3. Electrical connections..........................
  • Page 5 MAINTENANCE AND CLEANING....................... 14 3.1. Procedure in the event of faults ......................14 3.2. Precautions for long idle periods......................14 3.3. Maintenance .............................. 14 WASTE EQUIPMENT .......................... 15 APPENDIX............................16 - 5 -...

  • Page 6: Fitter's Instructions

    FITTER’S INSTRUCTIONS 1.1. PRECAUTIONS The following precautions should be taken before connecting the appliance: - Do not install or use the appliance in a place which is not well ventilated! - These appliances are designed exclusively for the catering trade and must be operated only by qualified personnel, trained in their use.
  • Page 7 1.3. Installation Installation, starting up and maintenance must be carried out only by qualified, authorized fitters. Installation must be carried out according to the current regulations mentioned above. If this clause is unheeded, the manufacturer will not be held responsible for faulty operation, especially when installation does not comply with the above-mentioned regulations.
  • Page 8 1.4. Preparations for operation WARNING: The calibration screws visible on the thermostatic valve and/or gas cocks cannot be tampered as they were sealed during the test of the unit. 1.4.1. Checking connection pressure Check connection pressure by means of a U-shaped manometer, minimum 0.1 mbar. Remove the setscrew from the pressure pipe and attach the manometer.
  • Page 9 1.5. Conversion and/or adaptation Appliances can be converted to other types of gas, e.g. from methane to LPG by replacing the nozzles on the main burner and pilot burner. The necessary nozzles are provided with the appliance and are clearly labelled. Consult the tables 1-2 in Appendix.
  • Page 10 1.6. Maintenance Our equipment do not need particular maintenance works. However we suggest to have them checked once a year by the Technical Services for: - Combustion, ignition and safety - Functional controls as per paragraph 1.4.6. - Efficiency of electrical and thermic protection device - Cleaning and tightening of the contact holdfast - Ducts and sheath insulation condition 1.6.1.
  • Page 11 1.7. Possible causes of faulty operation Problems may arise even when the appliance is used properly. Listed below are the most frequent faults, with possible causes: Fault Possible causes - Piezo-electric lighter not properly fitted - Piezo-electric lighter faulty - Pressure drop in the gas inlet pipe - Knob on the "ignition"...
  • Page 12 INSTRUCTIONS FOR USERS 2.1. PRECAUTIONS Warning: Never leave the appliance to operate unattended. Remember that some of the surfaces of the appliance become hot in use: Attention - danger of burns! Our appliances are designed exclusively for the catering trade and must be operated only by qualified personnel trained in their use.
  • Page 13 2.4.2. Start-up of oven 2.4.2.1. Ignition of oven pilot burner Open the oven door. Rotate the cover to expose the flame inspection hole on the bottom of the cooking chamber. Turn the thermostat knob to the position hold down the lighting push-button while pressing the ignition button ( symbol) repeatedly.

  • Page 14: Maintenance And Cleaning

    MAINTENANCE AND CLEANING "The job is not finished until the appliance has been cleaned!" This should be your motto! A well cared-for appliance will give you longer service and daily cleaning assures constant efficiency. Before cleaning the equipment, turn off the omnipolar switch between the appliance and the electricity mains inlet.
  • Page 15 WASTE EQUIPMENT INFORMATION FOR USERS IN EUROPEAN UNION COUNTRIES ONLY Under the terms of art. 10 of Directive 2002/96/CE of 27/01/2003 regarding waste electronic and electrical equipment (WEEE), transposed in Italy by Legislative Decree No.151 of 25 July 2005 • The symbol illustrated above is also attached to appliances to indicate that they have been released on the market and must be broken down into separate parts when the user decides to dispose of them (including all components, sub-assemblies and consumables used to make up the product).
  • Page 16 APPENDIX TABLES 1 Version with thermostatic valve GAS GRIDDLES SERIE 700 SERIE 900 SERIE 920 SERIE 110 SERIE 500 mbar Heating elements Nr. Nominal heat output : 6,10 12,20 7,30 14,60 6,90 13,80 9,50 15,00 3,70 7,40 [kW] Minimum heat output : [kW] Nominal consumption 0,646...
  • Page 17 TABLES 2 Version with gas cock GAS GRIDDLES SERIE 700 SERIE 900 SERIE 920 SERIE 110 SERIE 500 mbar Heating elements Nr. Nominal heat output : 6,10 12,20 7,30 14,60 6,90 13,80 9,50 15,00 3,70 7,40 [kW] Minimum heat output : 2,60 5,20 2,60...
  • Page 18 TABLES 3 Griddles 1/2 M 1/1 M 6,10 12,20 SERIE 700 FT01 6,10 FT02 12,20 7,30 14,60 SERIE 900 FT03 7,30 FT04 14,60 6,90 13,80 8,00 6,55 SERIE 920 FT05 6,90 FT06 13,80 FT06/SG 21,80 FT06/SE 13,80 9,50 15,00 9,80 8,60 SERIE 110 FT07...
  • Page 19 TABLES 4 Oven SERIE 920 SERIE 110 SERIE 500 Nominal voltage AC400-3N AC400-3N AC400-3N Nominal absorption 6,55 8,60 4,00 (kW) Frequency (Hz) Nominal current n. x mm2 (*) 4x1,50 4x2,50 4x1,50 (*) The supply cable must be at least type H07RN-F, minimum section (n. x mm2) - 19 -...
  • Page 20 Drawing 1 Positioning: free-standing or combined "A" Connecting strip "B" Fixing screws "C" Final trim "D" Fixing screws Free-standing positioning with floor fastening Remove one of the feet on the appliance and fit the floor bracket. Regulate height with the side screws and secure the appliance to the floor with the last screw.
  • Page 21 Drawing 2 (SERIE 500) Diagrams NOTE: The serial number label is placed on the front of the appliance and shows all installation data. Burners power: Burner Power [kW] FT09 FT10 Top version Top version Version on gas oven and cabinet Version on eletric oven Version on cabinet and oven Legend:...
  • Page 22 Drawing 3 (SERIE 500) Diagrams NOTE: The serial number label is placed on the front of the appliance and shows all installation data. Legend: Technical datas label - 22 -...
  • Page 23 Drawing 4 (SERIE 700) Diagrams Burners power: Burner Power [kW] FT01 FT02 12.2 Top version Top version Version on cabinet Version on cabinet and oven Legend: Gas connection - 23 -...
  • Page 24 Drawing 5 (SERIE 700) Diagrams NOTE: The serial number label is placed on the front of the appliance and shows all installation data. Legend: Technical datas label - 24 -...
  • Page 25 Drawing 6 (SERIE 900) Diagrams Burners power: Burner Power [kW] FT03 FT04 14.6 Top version Top version Version on cabinet Version on cabinet and oven Legend: Gas connection - 25 -...
  • Page 26 Drawing 7 (SERIE 900) Diagrams NOTE: The serial number label is placed on the front of the appliance and shows all installation data. Legend: Technical datas label - 26 -...
  • Page 27 Drawing 8 (SERIE 920) Diagrams Burners power: Burner Power [kW] FT05 FT06 13.8 Version on cabinet Version on oven Version on eletric oven Legend: Electric wire inlet Gas connection - 27 -...
  • Page 28 Drawing 9 (SERIE 920) Diagrams NOTE: The serial number label is placed on the front of the appliance and shows all installation data. Legend: Technical datas label - 28 -...
  • Page 29 Drawing 10 (SERIE 110) Diagrams NOTE: The serial number label is placed on the front of the appliance and shows all installation data. Burners power: Burner Power [kW] FT07 FT08 15.0 Version on eletric oven Version on gas oven and cabinet Legend: Electric wire inlet Gas connection...
  • Page 30 Drawing 11 (SERIE 110) Diagrams NOTE: The serial number label is placed on the front of the appliance and shows all installation data. Legend: Technical datas label Plumbing in Water outlet connection - 30 -...
  • Page 31 Drawing 12 (SERIE 500 - 110 1/2M) Griddle main burner NB: (*) Only on versions with chrome-plated hotplates. Legend: Main burner Venturi gauge Main burner nozzle Pressure tube Pilot burner nozzle Pilot burner Thermocouple Ignition spark plug Piezo electric lighter Safety thermostat - NB: (*) Only on versions with chrome-plated hotplates.
  • Page 32 Drawing 13 (SERIE 700-900) Griddle main burner Serie 700 Serie 900 Serie 900 NB: (*) Only on versions with chrome-plated hotplates. Legend: Main burner Pilot burner nozzle Pilot burner Thermocouple Ignition spark plug Air regulating bushing Main burner nozzle Pressure tube Piezo electric lighter Safety thermostat - NB: (*) Only on versions with chrome-plated hotplates.
  • Page 33 Drawing 14 (SERIE 920-110 1/1M) Griddle main burner NB: (*) Only on versions with chrome-plated hotplates. Legend: Main burner Venturi gauge Main burner nozzle Pressure tube Pilot burner nozzle Pilot burner Thermocouple Ignition spark plug Piezo electric lighter Safety thermostat - NB: (*) Only on versions with chrome-plated hotplates. Thermocouple - NB: (*) Only on versions with chrome-plated hotplates.
  • Page 34 Drawing 15 Oven burner and gas valve Legend: Front oven heart Back oven heart Lock Pressure tube Main burner nozzle Venturi gauge Main burner Pilot burner nozzle Pilot burner Thermocouple Ignition push button Turning off push button Regulation knob Regulation knob Thermostatic valve EUROSIT 630 Thermostatic valve MINISIT 710 Piezo electric lighter...
  • Page 35 Drawing 16 Legend: Reference and information about each cooking point Turner off position Pilot position Maximum supply position Minimum supply position Oven Reference and information about each cooking point Turner off position Regulation knob - 35 -...
  • Page 36 Drawing 17 Legend: A Turner off position B Pilot position C Temperature regulation field da 1 a 7 D Piezo electric lighter Temp. Temp. Pos. 1 ~ 100° Pos. 5 ~ 260° Pos. 2 ~ 140° Pos. 6 ~ 300° Pos.
  • Page 37 Drawing 18 (SERIE 500) (Oven) Legend: Green warning light Orange warning light Safety thermostat Electric resistance Thermostat Terminal board Clamps for heating element Knob Safety thermostat - 37 -...
  • Page 38 Drawing 19 Electrical diagram Serie 500 - 38 -...
  • Page 39 Drawing 20 (SERIE 900-920-110) (Oven) Legend: Green warning light Orange warning light Thermostat Terminal board Electric resistance Switch Knob Safety thermostat - 39 -...
  • Page 40 Drawing 21 Electrical diagram Serie 900-920-110 - 40 -...

This manual is also suitable for:

900 series920 series110 series500 seriesFt01Ft02 ... Show all