Yeelight YLXD01YL Manual

Yeelight Smart LED Ceiling Light
switching device, connecting
detail
Frontal projection of fittings
(basis) of the lamp
Opening for fastening of a
cartridge
Fixing opening for the self-
cut screw
Expansion Screw self-tapping
bolt shield screw x 2
x 2
blocking switch
Backside the lamp base
Opening for
threading of a cord
Basis
Metric screw Remote control (not
basic equipment)
Installation direction
1. Open packaging, get the ceiling lamp, shift inside the blocking switch, remove a support.
Attention! In order to avoid defeat by an electric current before installation it is necessary
to disconnect power supply, to set step by step accurately according to the instruction. The
wrong installation can lead to falling, the fire, defeat by current and to other accidents.
2. Fixing of the basis
Way a: to pass a cord of food through an opening for a cord, using the self-cut screw to fix
the basis on a ceiling, to be convinced that the basis is reliably fixed. (The recommended
way).
Way b: Check integrity of two knots of fastening of a connecting box of the lamp, after check
to stretch a cord through an opening for a cord, using metric screws to fix the basis with a
connecting box on a ceiling, to be convinced that the basis is reliably fixed.