Cleaning; Safety - National Instruments NI PXIe-8830mc PXImc User Manual

Processor module
Hide thumbs Also See for NI PXIe-8830mc PXImc:
Table of Contents

Advertisement

Random Vibration
Operating
............................................................................
Nonoperating
............................................................................

Cleaning

Use a dry, low-velocity stream of air to clean the NI PXIe-8830mc processor module. If
needed, use a soft, nonmetallic brush for cleaning around components.
Make sure that the device is completely dry and free from contaminants before returning it to
service.

Safety

This product is designed to meet the requirements of the following electrical equipment safety
standards for measurement, control, and laboratory use:
IEC 61010-1, EN 61010-1
UL 61010-1, CSA 61010-1
Note
For UL and other safety certifications, refer to the product label or the
Product Certification
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for electrical equipment
for measurement, control, and laboratory use:
EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity
EN 55011 (CISPR 11): Group 1, Class A emissions
AS/NZS CISPR 11: Group 1, Class A emissions
FCC 47 CFR Part 15B: Class A emissions
ICES-001: Class A emissions
Note
In the United States (per FCC 47 CFR), Class A equipment is intended for
use in commercial, light-industrial, and heavy-industrial locations. In Europe,
Canada, Australia and New Zealand (per CISPR 11) Class A equipment is intended
for use only in heavy-industrial locations.
Note
Group 1 equipment (per CISPR 11) is any industrial, scientific, or medical
equipment that does not intentionally generates radio frequency energy for the
treatment of material or inspection/analysis purposes.
Note
For EMC declarations and certifications, and additional information, refer to
the Online Product Certification section.
12 | ni.com | NI PXImc Devices User Manual
5 to 500 Hz, 0.3 g
5 to 500 Hz, 2.4 g
with IEC-60068-2-64. Nonoperating test
profile exceeds the requirements of MIL-
PRF-28800F, Class 3.)
section.
rms
(Tested in accordance
rms
Online

Advertisement

Table of Contents
loading

Table of Contents