Names And Functions Of Parts - Kenwood X-W320 Instruction Manual

Names and functions of parts

DUBB. indicators
NOR.
HIGH
1 0
DOLBY NR indicators
BC
Operation indicators (Deck A)
2 , 3 Transport direction
indicators
COUNTER indicators
A : Deck A
B : Deck B
A
1
1 Deck A
This deck is used exclusively for play-
back.
2 REV.M ODE key
Press to change the tape transport di-
rection.
3 DOLBY NR key
Press to sw itch the Dolby Noise Reduc-
tion mode to B = C = OFF . This makes
it possible to use the Dolby NR effect in
recording and playback.
4 CCRS key
Press to start recording after automatic
setting of the optimum CD recording
level and optimum tape recording bias.
5 DUBB. keys (NORM ./HIGH)
Press to start tape dubbing.
NORM . : Dubbing at t he norm al
speed.
HIGH : Dubbing at a high speed.
6 O.T.E. key
Press to use the O.T.E. (One Touch
Editing) function w hich allow s to record
CD on tape w ith a one-touch operation.
7 Deck B
This deck is capable of both playback
and recording.
Standby mode
While the STANDBY indicator of this unit is lit, a small amount of current is supplied to back up the internal memory of this unit.
This status is referred to as the standby mode of the unit. (The STANDBY indicator can light only w hen this unit is system-
connected w ith a system control cord. In the standby mode, this unit can be turned ON from the remote control unit of the
system-controlled component.)
Downloaded from: http://www.usersmanualguide.com/
Peak level indicators
20
15
L
R
DOLBY NR B C
STANDBY
A B
COUNTER
STANDBY indicator
2
1
2 7 3 0
¡
8 9
8 Deck A operation buttons
1
¡
!
7
2 , 3 : PLAY key
When this unit is system-connected
through a system control cord, pressing
£
the 2 or 3 key w hile a cassette tape is
loaded turns ON the system automati-
cally and starts playback of the cassette
deck.
9 Deck A eject (0) button
Press to open the cassette holder of
deck A.
0 RESET A key
Press to reset the tape counter of deck
)¡
A to "0000" .
! RESET B key
Press to reset the tape counter of deck
B to "0000" .
@ POWER sw itch
Press to turn this unit ON and OFF .
(Dolby NR reference level)
6 3 0 3
10
DUBB. NOR. (SP) HIGH CCRS
* * * * *
Display
3 4 5 6
STEREO DOUBLE CASSETTE DECK X-W320
DUBBING
REV.
MODE NORM. HIGH O.T.E.
DOLBY NR CCRS
POWER REC LEVEL
RESET
¶ 8
A B
MIN MAX
- ON – OFF
@ # $ % ^
0 !
: Rew ind key (for fast w inding of
tape tow ard the left reel seen
from you)
: Fast Forw ard key (for fast w ind-
ing of tape tow ard the right reel
seen from you)
: Stop key (Stop)
CCRS indicator
O.T.E. indicator
6 (dB)
Operation indicators (Deck B)
2 , 3 Transport direction
indicators
¶
Recording indicator
O.T.E.
8
Pause indicator
REV.M ODE indicators
M ulti-display
Counter indicator
Recording indicator
Recording source
CCRS mode
7
0 2 7 3
1
&
# REC LEVEL control knob
Turn to adjust the recording level.
$ Deck B record (
Press in stop mode to start recording or
press in record mode to let the record-
ing pause after leaving a non-recorded
blank of 4 seconds.
% Deck B pause (
8
Press to let tape transport pause tem-
porarily.
^ Deck B eject (0) button
Press to open the cassette holder of
deck B.
& Deck B operation buttons
1
: Rew ind key (for fast w inding of
tape tow ard the left reel seen
from you)
¡
: Fast Forw ard key (for fast w ind-
ing of tape tow ard the right reel
seen from you)
7
: Stop key (Stop)
2 , 3 : PLAY key
When this unit is system-connected
through a system control cord, pressing
the 2 or 3 key w hile a cassette tape is
loaded turns ON the system automati-
cally and starts playback of the cassette
deck.
X-W 3 2 0 (En)
B
¡
¶ ) key
) key