System Connections - Kenwood CD-224M Instruction Manual

System connections

M ake connections as show n below.
When connecting the related system components, refer
6
also to the instruction manuals of the related components.
Do not plug in the pow er lead until all connections are com-
pleted.
Be sure to use this unit placed on a level surface.
Audio cord
1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.
Notes Notes 2. When plugging and unplugging connection cords, be sure to first remove the pow er cord from the AC outlet. Plugging/unplugging
connection cords w ithout removal of the pow er cord can cause malfunctions or damage to the unit.
Downloaded from: http://www.usersmanualguide.com/
OUTPUT
L
SL1 6 XS 8
R
SL 16/ XS8 sw itch
System control cord
SYSTEM CONTROL
L
R
CD
Digital amplifier or receiver, etc.
M alfunction of microcomputer
If operation is not possible or erroneous display
appears even though all connections have been
made properly, reset the microcomputer refer-
ring to " In case of difficulty" .
Optical connection
(Except for the U.S.A., U.S. M ilitary and Canada)
Optical fiber cable (Commercially-available)
DIGITAL
OUT
OPTICAL
SYSTEM
CON TROL
7
System connections
CD-2 2 4 M / DPF-J5 0 1 0 (En)
⁄
To OPTICAL terminals
like receiver, M D, DAT,
etc.
Remove the protection cap
w hen using the DIGITAL
OUTPUT (OPTICAL) jack.
To w all AC
outlet