Welcome! Dear User, Thank you for choosing our P2 Hexaline. We are proud of delivering you the highest quality, the greatest design and the real passion with our product. Each fixture in Portman P range is different, but all of them ensure you the best performance and support your creativity.
WARNING This product is for professional use only! It is not for household use. P2 Hexaline presents risk of lethal or severe injury due to heat, electric shock, fire or falls. Intense and flashing light could trigger epileptic seizures. Read this manual before your initial start-up and follow the safety information in this manual and engraved on the fixture.
Page 5
USER MANUAL – Portman P2 hexaline | Safety information Protection against electrical shock • Disconnect the fixture from AC power when not in use. • Disconnect the fixture from AC power before any operation. • Do not remove the rear cover. There are no user-serviceable parts inside.
USER MANUAL – Portman P2 hexaline | Technical specification Technical specification dimensions 1910 x 205 x 170 mm (height with hanging clamp and height adapter) weight 9 kg + 3kg (base) input voltage 240V 50Hz/60Hz power max 1 900 W...
Before mounting the fixture read and follow the safety recommendations indicated in the Safety Information. The Portman P2 Hexaline may be installed on attached base (also using the size adaptor), hang on 2 points on the back of the fixture using rigging clamps or hang using hanging adaptor.
Page 10
USER MANUAL – Portman P2 hexaline | Preparation for use REMEMBER! Always use attached spigots and cotters to install or hang the fixture using base, height adaptor or hanging adaptor. REMEMBER! Never use more than one unit on base or on hanging clamp without additional safety support.
USER MANUAL – Portman P2 hexaline | Lamp and fuse replacement Lamp and fuse replacement To replace the lamp: • Disconnect the fixture from AC power. • Make sure the fixture and lamps are cool. • Open the front cover by releasing a screw located on top of the front cover.
Page 12
USER MANUAL – Portman P2 hexaline | Operation modes The Portman P3 PIX3L can work in three operation modes: Wired DMX mode, Wireless DMX mode (if the WDMX card is installed) and standalone mode. You can link The P3 PIX3L to a DMX controller using a 5 pin DMX wires, or Wireless Solution Sweden hardware (if WDMX card is installed).
USER MANUAL – Portman P2 hexaline | Menu Menu Navigation buttons are located under the LCD display on the back panel. To enter the menu hold enter button for 2 seconds. To navigate the menu use the “+” and “-“ buttons.
Page 14
USER MANUAL – Portman P2 hexaline | Menu 14/16...
Page 15
USER MANUAL – Portman P2 hexaline | Menu P2 hexaline v2.0 15/16...
Page 16
USER MANUAL – Portman P2 hexaline | Menu Portman Lights Sp. z o.o. Al. Zwycięstwa 96/98, 81-451 Gdynia, Poland +48 58 766 49 49 portmanlights.com /PortmanLights Help preserve the environment! Ensure that this product is recycled at the end of its life. Your supplier can give details of local arrangements for the disposal of Portman products.
Need help?
Do you have a question about the P2 hexaline and is the answer not in the manual?
Questions and answers