Polygroup LUMATIONS LED LIGHTWIZARD Owner's Manual page 4

NOTE: To get the full effects of Shows #4-10, make sure lights are plugged into all three outlets.
1. Press to select from the 10 preset shows in the follow sequence or to turn off the lights.
Show #1: Steady Glow
Show #2: Multi-speed Fading
Show #3: Multi-speed Blinking
Show #4: Chasing (Light effects will be played in sequence through every active port.)
Show #5: Shooting Star
Show #6: Stacking
Show #7: Sparkle
Show #8: Cross Wave
Show #9: Alternating
Show #10: Combo
OFF: Press once after Show #10 to turn off the lights.
* If you unplug and reconnect the product to the power outlet, the product will
replay the last show that was playing before cutting out the power.
2. Press to select from the 4 preset timer settings:
a. Setting 1: Lights ON for 4 hours and then OFF for 20 hours (LED indicator on Light Wizard will be Green).
b. Setting 2: Lights ON for 6 hours and then OFF for 18 hours (LED indicator on Light Wizard will be Blue).
c. Setting 3: Lights ON for 8 hours and then OFF for 16 hours (LED indicator on Light Wizard will be Red).
d. Setting 4: TIMER OFF (LED indicator on Light Wizard will be Yellow).
* The LED light on the remote control will blink 5 times in red before turning off when "Timer off" setting is selected.
3. The timer will reset after each Show/Timer selection, and after you unplug and reconnect the product to the power outlet.
4
FUNCTIONS
OWNER'S MANUAL
LED
Function
Timer
LED