Do you have a question about the 100010108 and is the answer not in the manual?
Questions and answers
Darrell Misak
January 27, 2025
I had a tv go bad and my kids threw away the D brackets that were attached to the back of the tv in my full motion mount model 100010108. Do you sell replacement D brackets?
Harold Davis
March 4, 2025
How to separate the wall pins (B)
1 comments:
Mr. Anderson
March 4, 2025
The manual does not provide specific instructions on separating the wall pins for Onn part number 100010108. However, it does mention choosing the proper wall plate pattern based on the wall condition and using an Allen key (P) to tighten screws (N) into the wall plate for certain installations. If you need to separate or adjust wall pins, refer to the wall plate assembly steps and ensure proper installation.
Page 1
47-84" Full Motion TV Wall Mount Model: 100010108 PRODUCT GUIDE 2026 ¥2...
Page 2
679m 643mm 600mm MIN 200mm 420mm 409mm 100mm — “5 422mm, ‘a Congratulations your latest purchase. Follow these simple instructions you'll have your TV mounted in no time. This mount fits most TVs 47in.- 84in.(119.38cm - 213.36cm), up to 100Ibs(45.5kg). Keep this instruction manual for future reference.
Page 4
choose corespondin Attach brackets (D) to the back of T V , 9 Screws, ster washers, spacers to fix the holes of TV rear. (Figure 2) A CAUTION: Using incorrect spacers may damage your TV. sole Figure 3 (keep the wall plate level) For wood studs: If you mount TV mount into wood studs, hold hanging template at desired position of wood stud, pre-drill the mark 4 holes using 7/32"...
Page 5
Hang the pre-assembled TV unit onto extension arms. Fasten the tube ‘on arms (B&C) picture shows, align extension Step mble extensi Step I I plate unit, then fasten them with screws (0) using allen clips with brackets by using screw (M) with a screwdriver. (Figure 8) holes with the wa (Figure 5) A CAUTION: This step must require 2 or more people to finish.
Page 6
Step 9: You may need loosen the screws @) to tilt TV at your desired angle, please remember to fasten the screws @ tightly after adjustment. (Figure 10) Step 10: Manage TV cables orderly and guide them through the velcros. (Figure 11) Figure Figure 11 PAY EXTRA CARE AND ATTENTION WHEN YOU FASTEN TWO TV BRACKETS TO THE...
Page 7
April 10, 2020_V2 We'd love to hear from you. Scan with your Walmart app and let us know what you think.
Need help?
Do you have a question about the 100010108 and is the answer not in the manual?
Questions and answers
I had a tv go bad and my kids threw away the D brackets that were attached to the back of the tv in my full motion mount model 100010108. Do you sell replacement D brackets?
How to separate the wall pins (B)
The manual does not provide specific instructions on separating the wall pins for Onn part number 100010108. However, it does mention choosing the proper wall plate pattern based on the wall condition and using an Allen key (P) to tighten screws (N) into the wall plate for certain installations. If you need to separate or adjust wall pins, refer to the wall plate assembly steps and ensure proper installation.
This answer is automatically generated