Advertisement
This manual has been prepared for the owners and operators
of the ARMEDICA™ AM-Series Hi-Lo Treatment Tables. It
contains installation instructions, precautionary instructions
and maintenance procedures for the following model numbers:
AM-134, AM-140, AM-234, AM-240,
AM-334, AM-340, AM-368
ISO 13485
FM 50089
.
Advertisement
Table of Contents
Related Manuals for Armedica AM Series
Summary of Contents for Armedica AM Series
- Page 1 This manual has been prepared for the owners and operators of the ARMEDICA™ AM-Series Hi-Lo Treatment Tables. It contains installation instructions, precautionary instructions and maintenance procedures for the following model numbers: AM-134, AM-140, AM-234, AM-240, AM-334, AM-340, AM-368 ISO 13485...
-
Page 2: Installation
AM-SERIES HI-LO TREATMENT TABLES Armedica Treatment Tables are intended to be used as physical therapy supports for patients during clinician attended physical therapy related diagnosis, treatment, and monitoring. The table is equipped with a vertical table height adjustment actuator and casters for mobile transport. -
Page 3: Maintenance
OPERATING INSTRUCTIONS To adjust the height of the ARMEDICA™ Treatment Tables, a low voltage hand switch or foot switch is used to activate the electric motor assembly. The up or down motion is clearly indicated by arrows. Duty cycle on/off Int. 1 min./ 9 min. -
Page 4: Symbols And Indicators
C. Check hand switch or foot switch to be sure it is plugged in. D. Thermal cutout may have activated. Allow the motor to cool. E. In the event there is a failure of the motor, the motor must be returned to Armedica Mfg. Corp. The motor must be serviced by the manufacturer. -
Page 5: Parts List Description
PARTS LIST ITEM PART DESCRIPTION QUANTITY 18174 BASE FRAME 28” WIDE 18178 BASE FRAME 36” WIDE 03105 MOTOR MAX65 8000N 120V 03107 POWER CORD 03106 FOOT SWITCH MAX65 8000N 03113 HAND SWITCH MAX65 (OPTIONAL) 18277 LIFTING ARM HEAD END 18330 LIFTING ARM FOOT END 18184 CONTROL ROD 3 PC... -
Page 6: Parts List
PARTS LIST ITEM PART DESCRIPTION QUANTITY 02065 SCREW HEX WASHER HEAD #14x1 02045 SCREW HEX HEAD CAP 1/4-20x1 18489 BASE FRAME 368 02005 BOLT SHOULDER 5/16-3/4 02035 SCREW BUTTON HEAD SOC 5/16-18x1-1/2 18328 TOP FRAME 334 18347 TOP FRAME 340 18172 334 FRAME HEAD SECTION 18187... - Page 7 TABLE BASE AM 234, 240, 334, 340...
-
Page 8: Top Frame
TOP FRAME AM 134, 140 REFER TO MODEL NUMBER COLUMN ON PARTS LIST FOR ITEMS WITH TWO REFERENCE NUMBERS. EXAMPLE: ITEM NUMBER 108 IS USED ON AM-134. ITEM NUMBER 109 IS USED ON AM-140 TOP FRAME AM 234, 240... - Page 9 TOP FRAME AM 334, 340 REFER TO MODEL NUMBER COLUMN ON PARTS LIST FOR ITEMS WITH TWO REFERENCE NUMBERS. EXAMPLE: ITEM NUMBER 73 IS USED ON AM-334. ITEM NUMBER 74 IS USED ON AM-340.
-
Page 12: This Warranty Does Not Cover
3. This warranty gives you specific legal rights and you may have other rights, which vary from state to state ARMEDICA™ does not authorize any person or dealer to create for it any other obligations or liabilities in connection with the sale of the tables. Any representation or agreement not contained in this warranty shall be void.
Need help?
Do you have a question about the AM Series and is the answer not in the manual?
Questions and answers