Advertisement
Table of Contents
- 1 Setting Your Combination
- 2 Press down on the CLEAR Button
- 3 Turn the OPEN Lever Clockwise 180° to Open the Lid
- 4 Use a Screwdriver to Remove the Screw from the Code Tamper Plate
- 5 Slide the Tamper Plate Towards the Hinge of the Keysafe
- 6 Important!
- 7 To Remove a Number or Letter from the Code
- 8 Testing Your Combination
- Download this manual
Keysafe Supra P500 Gebrauchsanleitung
1. Setting your combination:
There is no preset combination on your KeySafe P500.
Select your own combination.
Each number/letter can only be used once.
Do not use a combination that can be easily guessed.
Use five to seven digits in your combination.
Hold the plastic tab and pull open the weather cover.
Einstellen ihrer Kombination:
Es gibt keine voreingestellte Kombination auf ihrem Key Safe P500. Wählen Sie ihre eigene
Kombination. Jede Zahl/Buchstabe kann nur einmal verwendet werden. Verwenden Sie nicht eine
Kombination, welche leicht zu erraten ist. Verwenden Sie fünf bis sieben Ziffern in ihrer
Kombination. Halten Sie die Plastik-Lasche und öffnen Sie die Wetterschutzabdeckung.
2.
Press down on the CLEAR button.
Drücken Sie auf die Schaltfläche Löschen.
schlüsselbox.at |
Klaus Madzar – Blumberggasse 3 –1160 Wien | office@schluesselbox.at | +43 (0)1 480 56 56
www.schluesselbox.at
Seite 1
Advertisement
Table of Contents
Related Manuals for Keysafe Supra P500
Summary of Contents for Keysafe Supra P500
- Page 1 Keysafe Supra P500 Gebrauchsanleitung 1. Setting your combination: There is no preset combination on your KeySafe P500. Select your own combination. Each number/letter can only be used once. Do not use a combination that can be easily guessed. Use five to seven digits in your combination.
- Page 2 Keysafe Supra P500 Gebrauchsanleitung Turn the OPEN lever clockwise 180° to open the lid. Drehen Sie den OPEN/ÖFFNEN Hebel 180° im Uhrzeigersinn um den Deckel zu öffnen. Use a screwdriver to remove the screw from the code tamper plate. Benutzen Sie einen Schraubendreher um die Abdeckung der Codeeinheit zu lösen.
- Page 3 Keysafe Supra P500 Gebrauchsanleitung Slide the tamper plate towards the hinge of the KeySafe. Pull out the plate and remove the plastic card from the key cover. Entfernen Sie die Metallplatte von der Codeeinheit. Ziehen Sie die die Plastikkarte aus dem Deckel.
- Page 4 The OPEN lever must be in LOCKED position before the code can be changed. With the KeySafe P500 open, turn the open lever counter clockwise 180°, back to the locked position. Forcing the setting buttons when in the OPEN position may damage the KeySafe and void the warranty.
- Page 5 Keysafe Supra P500 Gebrauchsanleitung To remove a number or letter from the code, use the code change tool to push in the grooved arrow by the number/letter you wish to set. Turn 180° until the arrow pops back up completely and the arrow points in the OFF direction.
- Page 6 Make sure OPEN lever is in the locked position. If not, turn OPEN lever counter-clockwise until it’s in the locked position. On the front of the KeySafe, press only the buttons in your combination. Press each button in until it clicks. If you press the wrong button, push down on the CLEAR button and enter your code again.
Need help?
Do you have a question about the Supra P500 and is the answer not in the manual?
Questions and answers