Siemens SINUMERIK 840D sl Function Manual page 377

$SN_CEC_TABLE_WEIGHT[1]
$SN_CEC_TABLE_WEIGHT[2]
$SN_CEC_TABLE_WEIGHT[3]
;Changes to the following table parameters do not take effect until
;a Power On
;Define base axis X1
$AN_CEC_INPUT_AXIS[0]
$AN_CEC_INPUT_AXIS[1]
$AN_CEC_INPUT_AXIS[2]
$AN_CEC_INPUT_AXIS[3]
;Define compensation axis Z1
$AN_CEC_OUTPUT_AXIS[0]
$AN_CEC_OUTPUT_AXIS[1]
$AN_CEC_OUTPUT_AXIS[2]
$AN_CEC_OUTPUT_AXIS[3]
;Define distance between interpolation points for compensation values in f tables
$AN_CEC_STEP[0]
$AN_CEC_STEP[1]
$AN_CEC_STEP[2]
$AN_CEC_STEP[3]
;Compensation starts at X1=0
$AN_CEC_MIN[0]
$AN_CEC_MIN[1]
$AN_CEC_MIN[2]
$AN_CEC_MIN[3]
;Compensation ends at X1=2000
$AN_CEC_MAX[0]
$AN_CEC_MAX[1]
$AN_CEC_MAX[2]
$AN_CEC_MAX[3]
;Values of f tables with index [t1] are multiplied by values in g tables
;by the number [t2]
;in accordance with the rule of calculation specified above
$AN_CEC_MULT_BY_TABLE[0]
$AN_CEC_MULT_BY_TABLE[1]
$AN_CEC_MULT_BY_TABLE[2]
$AN_CEC_MULT_BY_TABLE[3]
;Define the g table values for g_i(y) :
;Function values g_1(x) for table with index [4]
Extended Functions
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
=1.0
=1.0
=1.0
=(X1)
=(X1)
=(X1)
=(X1)
=(Z1)
=(Z1)
=(Z1)
=(Z1)
=500.0
=500.0
=500.0
=500.0
=0.0
=0.0
=0.0
=0.0
=2000.0
=2000.0
=2000.0
=2000.0
=5
=6
=7
=8
K3: Compensation
5.4 Interpolatory compensation
377