Tool offsets
5.7 Change in the tool offset data
5.7
Change in the tool offset data
Effectiveness
A change in the tool offset data takes effect the next time the T or D number is programmed.
Set tool offset data to be active immediately
The following machine data can be used to specify that entered tool offset data takes effect
immediately:
MD9440 $MM_ACTIVATE_SEL_USER
If MD9440 is set, tool offsets resulting from changes in tool offset data during the part
program stop, are applied when the part program is continued.
82
DANGER
Programming Manual, 09/2011, 6FC5398-1BP40-2BA0
Fundamentals