Sia Digital Communication Standard - Climax Vesta Series Installer's Manual

 645 – GPS/Cell Locate Position Follow Up After Alarm (emergency)
 When an alarm is triggered, if GPS location could not be acquired
before the alarm report is made, Mobile Lite will report the alarm event
code first then follow up with event code 645.
 646 – Location Positioning Command (status)
 When Mobile Lite receives the SMS command "LOC" to report its
location, the report is sent with event code 646.
 647 –GPS Location Tracking (status)
 When Mobile Lite sends a periodic Location update according to
programmed interval of "Use Last GPS Location Setting".
 648 – Location Scream (status)
 When a user requests Mobile Lite to scream.
 671 – GeoFencing Action (status)
 When Mobile Lite leaves the programmed GeoFence area.

8.3. SIA Digital Communication Standard

Please refer to the document SIA Digital Communication Standard – Internet
Protocol Event Reporting (ANSI/SIA DC-09-2012A) published by the Security
Industry Association for details. Examples of events reported in the SIA/CID
format are as follows:
<LF>16680081"ADM-CID"0009L0#41770744318[#41770744318|1101 00
200][X006E33.66754530][Y46N31.02882385][P0,b:100%,d:0,g:4,t:201908151
00017,la:1,c:0]<CR>
Where:
"ADM-CID" means that the content of this message is in the CID format.

0009 for <seq>

L0 for <Lpref>

#41770744318[#41770744318|1101 00 200]

41770744318 = account number
1101 00 200 = CID data (QXYZ GG CCC)
[X...] and [Y...] are location data.

[X...] includes the longitude coordinate represented as E (for East) or W
(for West) _ degrees. The degree count is always a positive value.
[Y...] includes the latitude coordinate represented as N (for North) or S (for
South) _ degrees. The degree count is always a positive value.
[P...,b:...%,d:...,g:...,t:...,la:...,c:...] includes the following information:

58