Table of Contents
Advertisement
Safety information
General safety instructions
− Do not operate the appliance if it has been visibly damaged or
the mains cable or plug is defective.
WARNING!
Risk of explosion!
There is a RISK OF EXPLOSION AND FIRE due to the resulting fumes!
− Do not store or use any explosive substances such as aerosol
cans with a fl ammable propellant or other fl ammable materials
in this appliance or near to the appliance.
CAUTION!
Risk of injury!
Burns caused by low temperatures are possible.
− Do not touch the cold inner walls of the refrigerator
compartment with your hands.
Setting up the appliance
− Never place the appliance with the front edge along the edge
of a table top or shelf, because there is a risk of the appliance
tipping forwards and falling if the door compartment is
overloaded. Take care to ensure that there is suffi cient space in
front of the appliance so that when opening the door, the door
lies on the storage surface when the appliance is tipped.
− Connect the appliance to a properly installed safety socket
which is easily accessible and close to the place of installation.
The local mains voltage must correspond to the technical data
for the appliance.
− The socket must be freely accessible so that you can unplug the
appliance from the mains quickly if necessary.
− Do not use an extension cable.
10
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Ambiano MD 37182 and is the answer not in the manual?
Questions and answers
Hi My Ambiano table top fridge not getting cold but light still comes on inside Can you help me please
Your ALDI Ambiano MD 37182 tabletop fridge may not be getting cold while the light is still on due to the following reasons:
1. Door Not Sealing Properly – If the door is not shutting tightly or is opened too often, cold air may escape, reducing cooling efficiency. Check the door seal and ensure nothing is blocking it.
2. Frequent Door Opening – Avoid opening the fridge door unnecessarily, as this can cause temperature fluctuations.
3. Incorrect Internal Arrangement – Arrange the fridge contents so they do not obstruct the door from closing fully.
If these steps do not resolve the issue, contact customer service or a professional repair service.
This answer is automatically generated