Tyre pressure
What you should be mindful of
NOTICE
Always adjust the tyre pressure to the load.
▶
Check the pressure in all tyres at least once a
▶
month and before each longer ride.
Check the pressure when the tyres are cold. If nec-
▶
essary, do not reduce the elevated pressure when
the tyres are warm.
After each change in tyre pressure, save the new
▶
values in the tyre control display.
WARNING
Risk of an accident!
If tyre pressure loss is very quick, try to stop the
▶
vehicle carefully without heavy steering or heavy
braking.
Stickers with prescribed tire pressure values
The sticker with prescribed tyre pressures is located
on the inside of the fuel filler flap.
tion for the prescribed tyre pressure. This is not
a list of approved tire sizes for your vehicle.
These are in the vehicle's technical documenta-
tion, as well as in the declaration of conformity
(in the so-called COCDocument).
Tyre pressure reading for the front axle tyres
D
Tyre pressure reading for the rear axle tyres
E
Tyre pressure monitor
Functionality
The tyre pressure monitoring indicator indicates a
change in tyre pressure.
Warning when pressure changes
illuminates
›
Stop the vehicle.
›
Check the tyres and tyre pressures.
Show tyres with changed pressure
›
In the following menu, select the menu item for
displaying the tyre condition.
Filling pressure for
A
half a load
Filling pressure for
B
full loading
Tire diameter in in-
C
ches
This information only
serves as informa-
Wheels ›
Or:
Functional restriction
The system is unable to provide a warning in the
event of a very rapid tyre pressure loss, e.g. sudden
puncture.
The system function may be restricted in the follow-
ing cases.
Uneven loading of the wheels, e.g. with a trailer at-
▶
tached.
Sports driving style.
▶
Driving on unpaved roads.
▶
Fitted snow chains.
▶
Save tyre pressure values
Save tyre pressure values in Infotainment
›
Inflate the tyres to the stipulated inflation pressure.
›
Turn on the ignition.
›
In the following menu, select the menu item for
displaying the vehicle condition.
Or:
›
Using the functional areas
the tyre control display.
›
Tap the functional surface
›
Then follow the instructions on the screen.
Save the tyre pressure values in the following cases.
Change in tyre pressure.
▶
Change of one or more wheels.
▶
Change of position of a wheel on the vehicle.
▶
Always after covering a distance of 10,000 km or
▶
once a year.
Troubleshooting
Tyre pressure display faulty
flashes for about 1 minute and stays on
›
Stop the vehicle, switch off the ignition and
start the engine.
If the
symbol flashes again after starting the en-
gine, there is a system fault.
›
Continue driving, exercising appropriate caution,
and seek the help of a specialist garage.
Tyre pressure
195
select the menu for
.
Need help?
Do you have a question about the SUPERB IV 2020 and is the answer not in the manual?
Questions and answers