Table of Contents
Advertisement
ELECTRIC CHAIN HOIST
B Series Single Phase
0.25t to 3t
USER MANUAL
WARNING
This hoist should not be installed, operated or maintained by any person who has
not read all the contents of these general instructions. Failure to read and comply
with these instructions or any one of the limitations noted herein can result in
bodily injury and/or property damage.
Advertisement
Table of Contents
Related Manuals for TOHO B Series
Summary of Contents for TOHO B Series
- Page 1 ELECTRIC CHAIN HOIST B Series Single Phase 0.25t to 3t USER MANUAL WARNING This hoist should not be installed, operated or maintained by any person who has not read all the contents of these general instructions. Failure to read and comply with these instructions or any one of the limitations noted herein can result in bodily injury and/or property damage.
- Page 2 When lifting, the slings should be properly put into the hook throat with the safety latch properly closed. 2. Application B Series electric chain hoist is our newly developed product based on Japanese and with the features of compact structure, light weight, easily operation and Germany technology nice appearance.
-
Page 3: Dimension & Specification
4. Dimension & Specification B-0025 B-005 B-010 B-020 B-030 Item NO. Rated Load (ton) 0.25 Standard Lift (m) Lifting Speed (m/min) Output (kw) 0.45 Power Supply 1 P/220V/50HZ INS Class 30% (M4) cp 5X 15 Dimension of Load chain cp7.1X21 Strands of Load chain Test load (ton) 0.31... -
Page 4: Installation Instruction
1) Installation and test operating a) When B Series is applied to use, install the hoist to a support structure, switch o n i t a s t he nameplate indicated, and push the button to watch the running direction of load... - Page 5 space (1mm), then the working space should be adjusted over again, and if abrasion of friction disc near to the aluminum core, the brake disc should be replace in time, otherwise, the brake device can be damaged. c) Gearing: cleaned and grease lubricated (i.e.no.1) every year. d) Bearing: cleaned and grease lubricated (i.e.no.1) every year.
- Page 6 B (mm) C (mm) capacity (t) Normal Size Abnormal Size Normal Size Abnormal Size 23.4 19.5 17.5 24.3 19.8 28.8 21.6 31.5 Malfunctions and settlement Malfunctions Causes Settlements Wires unconnected Check and fasten all the loose result power off wire connection points. hoist refuse operate under switch on...
-
Page 8: Parts List
10. Parts List Part name Quantity Part name Quantity Cover A Nut washer Motor cover packing Rolling bearing 6004Z Electric board Spring set Axle race 25 Spring Brake assembly Friction disk pressing panel Rolling bearing 6005Z Washer A Pinion gear A Limit device base Flat key 8x7x2Q Pinion B... -
Page 9: Electrical Drawing
11. ELECTRICAL DRAWING STOP Push-button switch C7-- PE� 24V/AC � ' " 1...
Need help?
Do you have a question about the B Series and is the answer not in the manual?
Questions and answers