iBeam TE-FDEM Manual

Download this manual

IMPORTANT

If you are having difficulties with the installation of this product, please call out Tech Support line at 1-

800-253-TECH. Before doing so, looks over the instructions a second time, and make sure the

installation was performed exactly as the instructions are stated. Please have the vehicle apart and

ready to perform troubleshooting steps before calling.

REV. 07/17/2018

Need help?

Do you have a question about the TE-FDEM and is the answer not in the manual?

Page 1 IMPORTANT If you are having difficulties with the installation of this product, please call out Tech Support line at 1- 800-253-TECH. Before doing so, looks over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.
Page 2 TE-FDEM Manual...
Page 3 1. Box Contents Wiring Emblem/Camera 2. Applications 2011-2016 Ford F150 Super Duty 3. Installation • Connect the RED wire to a 12V reverse trigger. • Connect the BLACK wire to a chassis ground. • Cut the WHITE loop to cancel the parking guide lines.
Page 4 4. Wiring diagram Extension cable Camera cable 26 ft 2 ft 12v trigger Ground & power 5. Specifications Sensor CMOS ¼ sensor Resolution 400 TV Lines Field of View Diagonal 168°, Horizontal 136°, Vertical 100° Illumination 0.1 Lux IP Rating IP69 Parking Lines Defeatable...